UNSOLVED

affeee

updated

3 months ago

A

affeee

3 Posts

0

27534

June 13th, 2007 14:00

Windows 2003 R2 x64 on Poweredge 2950?

Hi

I am having trouble to install Windows 2003 R2 x64 on a Poweredge 2950. First off drivers for SAS PERC 5i is not included on the Windows installation disc, so i tried to load the drivers with the "Dell USB Key F6 Driver Utility". This did not work.

Then i tried the Nlite method, but no luck there either.

PLease help.
  • Eric BY

    2 Intern

    •

    815 Posts

    1669

    0

    Posted June 13th, 2007 16:00

    Have you tried using the DOSA CD that was included with your server?
  • affeee

    3 Posts

    1669

    0

    Posted June 14th, 2007 08:00

    Thanks. I recived the CD from the company who owns the server. Problem solved.
  • affeee

    3 Posts

    1669

    0

    Posted June 15th, 2007 11:00

    I had the same problem. I used nlite to create a new cd from the original, pointing to the folder containing "i386". Then it worked.
  • 1669

    0

    Posted June 15th, 2007 11:00

    I have more or less the same issue.
    I have booted the server on the "Installation and Server Management" cd as prompted.
    But I cannot sellect Windows 2003 R2 x64 edition in the supported operating systems.
     
    So I tried to select the old release of 2003 x64, but when I get to where it wants the MS cd, it just wont take the R2 cd.
     
    Pls assist.
  • 1669

    0

    Posted June 15th, 2007 11:00

    Heya,
     
    Thanks for quick reply... any chance you can go into more details on how you did that?
     
    Thanks in advance!
     
    Rasmus
  • Mark RD

    1 Message

    1669

    0

    Posted July 18th, 2007 19:00

    Download the win2003 R2 X64 iso from Microsoft Download Daemon Tools Download nLite Mount the win2003 R2 iso using Daemon Tools. Open nLite and walk through creating a bootable ISO image. Basically nLite copies the files out of the Microsoft ISO and makes it so you can install to your 2900 series server. I need to compare the 2 iso's to see what changed but I FINALLY have my servers up and running using the downloaded ISO's from Microsoft.
  • brownt57

    2 Posts

    1669

    0

    Posted September 26th, 2008 13:00

    I have the same problem and I looked through all the disks I received with the system. I received 4 DELL cd's ("Installation and Server management", "System Management Consoles", Service and Diagnostic Utilities", and "Documentation". All version 5.2) I also received a 2 cd set of the Gold Windows Server 2003 R2 x64 Standard edition disks. I have never seen a DOSA. The PERC Raid 5i is present but no operating system. When trying to install Windows, by booting from the Windows CD, it stops and says NO Hard Drive present on this system.
  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    1669

    0

    Posted September 26th, 2008 13:00

    I think it's now called the "Installation and Server management" CD. Try booting to that.
  • brownt57

    2 Posts

    1669

    0

    Posted September 26th, 2008 19:00

    Took out another  "Installation and Server management" CD and it worked. When it came to choosing the OS , there was no choice for Win2003 R2 x64 so I chose Win2003 standard x64 and it worked fine using the Win2003 R2 x64 OE disks.

      Thank you for the assistance.