UNSOLVED

sivou

updated

3 months ago

S

sivou

2 Posts

0

12661

September 13th, 2006 06:00

PE2950 Re-Installation Help

Hi All,
 
I've got a new PE2950's server. I'm trying to re-install Windows Storage Server 2003 R2 via the "Installation & Servermangement CD Version 5.0". After boot up by the CD,
 
The boot options of :-
 
1. Server Assistant
2. Server Assistant with CD Media Check
3. Skip CD boot - Boot to hard disk
 
The boot option "1" was selected. Upon choosing this selection it shows
 
Loading SA.1.............................................
Loading SA.2.............................................
..................................................................
Ready.
Uncompressing Linux... Ok, booting the kernel.
 
Booting the system, please wait....
To being replication, please insert your replication floppy.
Replication will begin once the system has booted.
 
I've got an issue at this part. Firstly, where do I go about to source for a replication floopy. The PE 2950 has no floppy as well. No idea, on how to proceed on.
 
Hope you guys out there can provide some assistance. Many thanks.
 
Cheers
sivou 
  • Mark_A_Smith

    2 Intern

    •

    827 Posts

    325

    0

    Posted September 13th, 2006 12:00

    A repliaction floppy is made when you create one using the ISM process.  If you do not have one then you can simply ignore this part (ie - skip it).
  • sivou

    2 Posts

    325

    0

    Posted September 13th, 2006 12:00

    Hi Mark,

    I just waited for sometime and even afterI pressing Enter and waiting longer for some time nothing happens.

  • Mark_A_Smith

    2 Intern

    •

    827 Posts

    325

    0

    Posted September 13th, 2006 13:00

    There is a new verision of the ISM CD available.  Maybe it will help.
  • DPYeilding

    80 Posts

    325

    0

    Posted September 14th, 2006 13:00

     
    Directions for installing:
     
    1. Insert the "Dell PowerEdge Installation and Server Management" CD
      into the CD drive and reboot the system. If the system is
      supported by the CD, a graphical user interface (GUI) that
      displays a photograph of the system is shown.
     
    2. Keep all configuration information for the system ready.
     
    3. Click "Continue" and follow the instructions to complete the
      installation. Context-sensitive help is provided on each page.
     
    4. Insert the operating system CD when asked by the system.
    5. For Windows, SUSE Linux Enterprise Server and Red Hat Enterprise
      Linux systems, remove the operating system CD from the CD drive
      before clicking "Finish."
    6. The system reboots and the unattended operating system
      installation continues.
     
    7. When the installation is complete, your system is ready for use.
  • adpwl1

    14 Posts

    325

    0

    Posted September 18th, 2006 23:00

    Unless it has changed on the 9th gen servers, Windows Storage Server R2 is reloaded via the USB key suppied with the server, instead of using the ISM CD.

    Storage Server R2 is treated different than standard Windows R2

    Message Edited by adpwl1 on 09-18-2006 08:48 PM