Solved!
Go to SolutionSP
Sean Pilgrim
3 Posts
0
12221
November 20th, 2018 15:00
T110 II Perc S100 Driver
For the life of me I need the .inf file and not the .exe's that are available on the Dell site for the Perc S100 raid controller. It is for a 2008 R2 x64 server. Please help, I have been banging my head against my desk for several hours now trying to get this server back online.
It's not that I need to repair windows or run the exe in the repair module. I need to boot into EaseUS Partition Manager and extend the C volume and decrease the D volume because its so full that boot up fails before the login screen.
Hello
If you select 2008R2 as the operating system on the T110 II and go to SAS RAID, in the bottom section you should be able to locate the S300/S100 driver. There is a driver on the download page listed as hard disk. That should be a self-extracting executable with an information file that you can use to load the driver.
Thanks
Sean Pilgrim
3 Posts
11272
0
Posted November 21st, 2018 12:00
You are a genius. Thank you!
ArduinoGuy
20 Posts
11265
0
Posted November 21st, 2018 15:00
Glad it helps man!
ArduinoGuy
20 Posts
11283
2
Posted November 21st, 2018 12:00
Hey Sean,
What I do is rename the .exe to .zip. If you open the folder, you find a payload directory. Everything you want is in there.