Dell PowerEdge T300 onboard RAID 5 "redundancy failed" error in Windows Server
2008
My T300 has recently been showing a "Redundancy failed" in the Windows Server Manager Disk Management section. However, I cannot seem to be able to track the issue otherwise from the Dell Server Administrator or other tools. It is currently configured with 3 1T drives and the onboard SATA adapter. The drives are accessible otherwise. I do not see any SATA messages at boot, which is also suspicious.
How do I track down this issue? Shouldn't I see SATA configuration messages at boot? This seems like it could be a serious error.
I'm assuming you are running a software (Windows-managed) RAID 5 ... Server Administrator cannot monitor Windows-managed RAID arrays. If you are receiving a Redundancy message on a software RAID, about all you can do is test the drives to see which is bad. However, this should also show in Disk Management. To test the drives you can use 32-bit (bootable by F10 Utility Partition or downloadable in bootable form from Support Site), or the Online Diagnostics may be able to test them from Windows (choose Quick Test).
I'm assuming you are running a software (Windows-managed) RAID 5 ... Server Administrator cannot monitor Windows-managed RAID arrays. If you are receiving a Redundancy message on a software RAID, about all you can do is test the drives to see which is bad. However, this should also show in Disk Management. To test the drives you can use 32-bit (bootable by F10 Utility Partition or downloadable in bootable form from Support Site), or the Online Diagnostics may be able to test them from Windows (choose Quick Test).
I understand this part, It helps me out of the problem, It's very detailed, Thanks for your analysis!
theflash1932
11 Legend
•
16255 Posts
485
1
Posted August 11th, 2010 09:00
I'm assuming you are running a software (Windows-managed) RAID 5 ... Server Administrator cannot monitor Windows-managed RAID arrays. If you are receiving a Redundancy message on a software RAID, about all you can do is test the drives to see which is bad. However, this should also show in Disk Management. To test the drives you can use 32-bit (bootable by F10 Utility Partition or downloadable in bootable form from Support Site), or the Online Diagnostics may be able to test them from Windows (choose Quick Test).