Good Day,

 

I have the following configuration on two DELL PC 5324 Switches:-

 

#spanning-tree mode rstp

#vlan database

#vlan 11,100,250

 

#interface range ethernet g(1-2)

#switchport mode general

#swictport general allowed vlan add 11,100,250

 

#interface range ethernet g(5-12)

#switchport mode access

#swicthport access vlan 11

 

#interface range ethernet g(17-18)

#switchport mode access

#switchport access vlan 100

 

#interface range ethernet g(19-20)

#switchport mode access

#switchport access vlan 250

 

#interface port-channel 1

#switchport mode trunk

#swicthport trunk allowed vlan add 11,100,250

#gvrp enable

 

#interface range ethernet g(21-22)

#channel-group 1 mode auto

 

I can ping devices on the same VLAN configured on two switches as access ports. But I cannot do the same on general ports (g1 & g2 here). That means a device on switch 1 on port 5 cannot access another device on swicth 2 port 1. But on switch 2 port 5-12 its possible.. Can you please tell me any further config is required for general ports.. ONLY GENERAL PORTS PROBLEMATIC

 

Please advice ASAP

 

Kind regards

 

Rumhy