Help

Start a discussion
UNSOLVED

heshoots

updated

16 years ago

H

heshoots

17 Posts

0

18600

June 10th, 2010 14:00

6224 MIB

Good Day All,

I have a PowerConnect 6224 running the latest and greatest firmware 3207. I have SNMP configured on it but I am not getting what I expect too so I am wondering what parts of the MIB that they sent along with the firmware I need to load. I am looking for CPU, MEMORY, TEMP and INT STATUS.

I would greatly appreciate any help that could be given.

 

Regards,

  • V

    vt1012

    212 Posts

    680

    0

    Posted June 11th, 2010 09:00

    Here are the sensor OIDs used for the 6224.  Each interface status can be found in the if-MIB/ifTable. 

    Temperature

    • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.2
    • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.3
    • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.4

    CPU

    • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2
    • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.3

    Memory

    • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1
    • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2

    Power Supplies

    • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.7.1.2
    • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.7.1.3

    Fans

    • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.2
    • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.3
    • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.4
    • .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.5

Dell Support Resources

Latest Solutions

View More