UNSOLVED

shuegli

updated

17 years ago

S

shuegli

39 Posts

0

1751

November 10th, 2009 23:00

I cant Backup anymore. is it posible that the diverent WWnnumber in inquire are the reason?

Hi

We habe a Networker 7.4.4 and 2 Falconstor VTL 4.0
We upgrade yesterday 1 to Version 5.1
The problem is now all Red Hat Linux and Solaris cant Backup anymore. Windows work normaly.
The Networker give the Message
Nov 11 08:28:01 bwbckse1zhh logger: NetWorker media: (alert) device "/dev/nst2": serial number mismatch, check system device ordering. Expected "Serial Numbers:WWNN=500630323141AAA
A:ATNN=HP      Ultrium 3-SCSI  8AU5S0021A:8AU5S0021A", found ":WWNN=4850202020202020:8AU640023J"

So i checked the WWN and the Serial Number.
The Serial Number is OK.
But the WWN is wrong.
Example:
The VTL has WWN 50:06:0b:00:00:64:5c:52 is i do a inquire on the Linux Server i see
[root@zhhsubnp-apst01 dev]# inquire
scsidev@0.0.0:HP      Ultrium 3-SCSI  G27D|Tape, /dev/nst0
        S/N: 8AU5S0020M
        ATNN=HP      Ultrium 3-SCSI  8AU5S0020M
WWNN=50063032304DAAAA
WW2N=50060B000029AAAA
scsidev@0.0.1:HP      Ultrium 3-SCSI  G27D|Tape, /dev/nst1
        S/N: 8AU5S0020N
        ATNN=HP      Ultrium 3-SCSI  8AU5S0020N
WWNN=50063032304EAAAA
WW2N=50060B000029AAAA
scsidev@0.0.2:HP      Ultrium 3-SCSI  G27D|Tape, /dev/nst2
        S/N: 8AU5S0021E
        ATNN=HP      Ultrium 3-SCSI  8AU5S0021E
WWNN=500630323145AAAA
WW2N=50060B000029AAAA
scsidev@0.0.3:HP      Ultrium 3-SCSI  G27D|Tape, /dev/nst3
        S/N: 8AU5S0021F
        ATNN=HP      Ultrium 3-SCSI  8AU5S0021F
WWNN=500630323146AAAA
WW2N=50060B000029AAAA

Complitly diverent WWN number. is that normal?

Then i checked a Windows. We habe HBanyware installed. In HBanyware the WWN is correct. but if i do a inquire the get the same strange WWN number as on a Linux. So i have no idee way Windows is working and Linux not.

I hope some one can help me

Thanks
Stephan

  • sweller1

    78 Posts

    308

    0

    Posted November 11th, 2009 09:00

    Hello Stephan,

    I see better now what you are dealing with based on the combination of this thread and your later one.


    I would urge you a little stronger now to contact Support or your EMC Account rep as there is some internal documentation that they have available which may be quite helpful to you in regards to this issue.

    Feel free to have them contact me if they have any questions.

    Cheers!

    Steve

  • hcrvelin

    11 Posts

    308

    0

    Posted November 11th, 2009 11:00

    NW keeps a track of WWNN and if they change it will complain.  What worse, it may indicate drive order has changed too.  If not too complex for you, I believe the easiest way to fix this is to delete jukebox and drive definition and to reconfigure it again.  Apart from that, there is I believe known issue where these serial numbers are not updated correctly thus if your problem would persist it would be wise to involve support.