UNSOLVED

Phil B.

updated

22 years ago

PB

Phil B.

18 Posts

0

5857

April 11th, 2005 00:00

1703FPt Digital Flat Panel

  I have a 1703 FP digital Flat panel and am using it in Analog mode.   What do I need to utilize the digital mode?  Any help appreciated.  Thanks.
 
Phil
  • SR45

    2 Intern

    •

    12138 Posts

    188

    0

    Posted April 11th, 2005 10:00

    You need a DVI cable ( Digital ), which each end, are white in color, and should have come with your monitor as it did with my 1703FP monitor.  You connect this cable to the under side of the monitor, and the other end into the white connector to your video card.  That's if you have a video card that has both the blue analog connector as well as the white connector.  Do not connect both analog and digital cables at the same time.  Afterwards, you have to switch from analog to digital, by pushing in on the front middle button of your monitor.

    http://support.dell.com/support/edocs/monitors/1703fps/en/attach.htm  This is the link to our monitor and you will clearly see the DVI cable connector from here

    Dim 4400 ( 2002 )
    2.6 Ghz
    Bios A06
    1 Gb DDR 2100
    Windows XP Home
    SP-2
    1703 FP LCD monitor
    PC-Cillin Internet Security

    Message Edited by SR45 on 04-11-2005 06:41 AM