UNSOLVED

cathardo

updated

18 years ago

Closed

C

cathardo

17 Posts

0

44112

September 18th, 2008 01:00

Inspiron B130 New Image. Please help

I have just reloaded a new XP os image  in my daughters Inspiron B130.  I am having problems configuring the wireless internet.  I have downloaded drivers from suggested drivers, but apparently I don’t understand how / which drivers to install.  Currently I have errors in device manager for

Intel Pro Wireless (driver may be corrupt)

Ethernet Controller (no driver loaded)

PCI Device (no driver loaded)

Video Controller (no driver loaded)

  • Sofu

    984 Posts

    747

    0

    Posted September 18th, 2008 02:00

    Windows XP drivers for the Inspiron B130 can be downloaded from Dell at this link. Advice on the correct order to install Notebook System Software, Chipset driver and other drivers is at this link.

  • cathardo

    17 Posts

    747

    0

    Posted September 18th, 2008 09:00

    John

    Thanks, but had tried that, Since I selected them as "add to my downloads" I ended up with folders R114079, R128346, R150593 etc.  No idea which is which.

     

    I thought I had unzipped and loaded the the DSS, then chipset, then video, then network, but apperently not.  Am I susposed to load the drivers through the device manager??

  • Sofu

    984 Posts

    747

    0

    Posted September 18th, 2008 14:00

    The Notebook System Software (NSS) is download file R120775.EXE

    The Chipset Driver is download file R114079.EXE

    The Video Driver is download file R128346.EXE

    Note: All I had to do to find these was to select Download for the particular driver and note the filename in the window that came up. Then cancel the download.

     

    To find Installation Instructions for each driver use the link that I gave to the Drivers and Downloads Website. Click on the box beside the driver type to expand it. The click on the link File Title then click the box beside Installation Instructions. Write down the instructions for each driver.

     

    For more information use this link to the Dell article "How to Use the Drivers and Downloads Website". Note the section "How to Determine Which Components are in your computer" then use the System Configuration Tool.

     

    Since you have become confused about what you have done it would be best to start again.

  • cathardo

    17 Posts

    747

    0

    Posted September 18th, 2008 20:00

    John

    Again, thank you for hanging in there. 

    Following your lead, I have re-downloaded each driver, this time individually rather then as a single download, and recorded their cryptic names. I have also downloaded the install instructions.  As predicted, there still remains the question which network driver is which.  My order of install should be:
    1. DSS
    2. Chipset
    3. Video Adapter
    4. NIC (under Network Category)
    5. Audio
    6. Modem
    7. Wireless Network Card (under Network Category)
    There were two drivers under the network category, but  no distinction between the NIC driver and wireless driver.  Conflicts will prevent me from loading these until tomorrow night, but I will keep you (and this forum)  informed of the progress.
  • Sofu

    984 Posts

    747

    0

    Posted September 19th, 2008 06:00

    cathardo

     

    1. Notebook System Software 

    In two postings you have mentioned DSS. This is Desktop System Software whereas you need the Notebook System Software (NSS) for the Inspiron B130 with the download file name R120775.EXE.

     

    2. Network Drivers

    You need two drivers, one for the Broadcom network controller and the other for the Intel PRO/Wireless Network Connection.

     

    Good luck with your installation.

     

  • cathardo

    17 Posts

    747

    0

    Posted September 20th, 2008 23:00

    Yes John, simple typo, I used NSS, not DSS.

     

    However, still no luck.  I have rarely been so frustrated.  I’ve even started from scratch with a new OS install.  I’ve installed the drivers in the following order

    NSS (R120775)

    Chipset (R114079)

    Video (R128346)

    *WLAN Card (R151519)

    Audio (R171789)

    Modem (R90851)

    *ProWireless (R155386)

     

    *First attempt installed ProWireless before WLAN (there’s little indication which goes first)  Since that didn’t work, then uninstalled devices using device manager in safer mode and then used above sequence.  When I run ProWireless it reports Wireless Lan Adapter state= not present, status=error.

     

    Some background.  The system was working just fine to start, but daughter partially installed windows upgrade, and stopped midway, causing OS to no longer be usable, that started this OS reconfiguration.

  • Sofu

    984 Posts

    747

    0

    Posted September 21st, 2008 04:00

    When Windows Vista is installed from an image ideally I would expect the image to contain all necessary drivers for the exact configuration of the target computer. Please advise details of the computer that the image of Windows Vista was intended for.
    Message Edited by Sofu on 09-21-2008 07:45 PM
  • cathardo

    17 Posts

    747

    0

    Posted September 21st, 2008 10:00

    John,

    Again, thanks for holding in there.  The OS was installed using a replacement disk recieved from dell.  (my daughter and son-in-law lost the original disks somewhere during a move).  Dell was nice enough to send me;

    •   Windows Reinstallation CD (windows XP SP2) P/N MP849
    •   Application Disk (Cyberlink Power DVD) P/N C830D
    •   Tools System (Antivirus, Support, Multimedia, Internet, and appears to only want to connect to dell.com) P/N N714

     a request to include the drivers with the replacement disks from dell recieved "the drivers CD is only send with the current shipping systems, However dell has stopped shipping the I1300" (AKA B130)

  • cathardo

    17 Posts

    724

    0

    Posted September 21st, 2008 14:00

    Perhaps one more clue.  In continued desperation i again started over with new OS load.  when I got to the ProWireless drivers, (R155389) the load completed ~30% and then froze the system (no mouse control, no nothing).  Does this give any insight?
  • cathardo

    17 Posts

    274

    0

    Posted September 21st, 2008 14:00

    forgot to include in above, that this 'lockup' had happened during earler attempts as well