UNSOLVED

southerngurl

updated

21 years ago

Closed

0

15789

November 30th, 2005 15:00

Choppy performance

My computer has developed "choppiness".
 
I have a Latitude C610, 30 gig hard drive, around 1 G processor, and 256 memory. I am running Windows 2000, proffessional.
 
The problem is very noticable in the cursor and in sound. Sound is choppy and echoes. The cursor moves choppily and with a slight delay. Do I need to reinstall windows, or is there something simpler I can do. I really need to get this fixed ASAP, and thought I would ask before I went reinstalling windows.  
  • AussieChris

    4152 Posts

    251

    0

    Posted November 30th, 2005 18:00

    Hi,

    Have a look at the CPU activity. If it is high while doing nothing, you will need to re-install Windows. At idle it should be 1 % or less. Your model also had issues with the touch stick ( in the KBD ) If it has been disabled because of this, it make the touchpad behave as you describe. The problem was a wandering pointer.

                                                                            Regards Chris

  • 251

    0

    Posted November 30th, 2005 20:00

    From what I just looked up, the processor time  should be under 75, so that must not have been what you were talking about. Where is that at? I don't have anything like that in system tools.
  • 251

    0

    Posted November 30th, 2005 20:00

    Thank you for your reply.
     
    I'm not sure if I went to the right program. I went to control panel and administrative tools, and opened up the system performance? I set the system monitor to processor time. It jumps around 50 - 60% when I am not doing anything. I do have norton running.
     
    The problem is not just the cursor, but also the sound is choppy. I do not have the pointer stick disabled. I will do that, but I doubt it would help anything.

    Message Edited by southerngurl on 11-30-2005 04:04 PM

  • 251

    0

    Posted November 30th, 2005 23:00

    Thank you for responding, I had just found it right before I checked back here and saw your last post. It shows CPU usage at 50 percent when I am doing nothing. So I guess I should reinstall?
     
    Now, the cursor and sound does this constantly, and consistently, whether I am running anything at all.
  • AussieChris

    4152 Posts

    251

    0

    Posted November 30th, 2005 23:00

    Hi,

    You can download them from the notebook tab above. They make a set of 5 floppies. If you have the resource CD, it will boot with the Diags. You will most likley fix it with a reload, but if you can rule out most other things you wont waste your time.

                                                                             Regards Chris

  • AussieChris

    4152 Posts

    251

    0

    Posted November 30th, 2005 23:00

    Hi,
     
    If you right click on the taskbar, then select task manager and then the performance tab. If the CPU activity is high, then the OS will need reloading. Sometimes the CPU runs at 100 %, this is a sign of trouble. The fan will also run a lot. You can run the Diags, that will test it outside of the OS. You can run an audio test.  A DVD that is "choppy " is often the first sign of trouble.
     
                                                                            Regards Chris
  • AussieChris

    4152 Posts

    251

    0

    Posted November 30th, 2005 23:00

    Hi,

    That sounds way too much. You can shrink the performance window down and watch it while you run other stuff. At times the CPU will go to 100 %, but unless you do serious number crunching, it should not stay there. Have you tried the Diags with the sound ?

                                                                             Regards Chris

  • 251

    0

    Posted November 30th, 2005 23:00

    How do I go about doing the diags?

    Message Edited by southerngurl on 11-30-2005 07:59 PM

  • 251

    0

    Posted December 1st, 2005 00:00

    It is running the extending tests right now. I just got these two errors:
     

    Diskette Drive B - Diskette Drive Read test

    Result code 1100-0329

    Msg: the bios status indicates the the seek operation (positioning the drive's heads to location (cylinder: 0000 Head: 00 Sector: 09) failed.

    Diskette Drive B - Diskette Drive Write Test

    Result Code: 1100-0429

    msg: The BIOS indicated the the seek operation (positioning the drive's heads to location (Cylinder: 0000 Head: 00 Sector: 09)) failed.

    The double "the's" are not typos, they are on the messages, LOL>

    Message Edited by southerngurl on 11-30-2005 08:55 PM

  • AussieChris

    4152 Posts

    98

    0

    Posted December 1st, 2005 01:00

    Hi,

    There may be an issue with the floppy. How much does the fan run ? If you run the specific tests you can check the audio. Running the extended tests will test many things, but not the sound like the specific test will.

                                                                         Regards Chris