UNSOLVED
J
jamesvoigt
1 Message
0
1200
February 1st, 2004 20:00
USB and System Not Starting
I am working on a 2400 with a Bios Version A00, When I have a HP PSC 2410 USb plugged in, the system will not start, as soon as I unplug the USB cord, the system start normal. After the system starts, I can plug in the device and everything is fine.
Will A05 fix this issue? Are there any issue with this Bios Version.
Any Thoughts.
Thanks so very much
velvet revolver
69 Posts
360
0
Posted February 1st, 2004 20:00
you may want to try turning off usb emulation in your current bios first. if it does not work then try updating your bios.
§
dglad,
Note that in order to keep things less confusing, it is never a good idea to jump into an existing thread and ask a new question.
For your system, the Legacy USB options are in the Peripheral Configuration sub-menu. Documentation for your system is at:
http://docs.us.dell.com/docs/systems/dwill/0682e.pdf
Note that you will need the free Adobe Reader in order to view the file.
Steve
DELL-Donald K
2 Intern
•
3969 Posts
360
0
Posted February 1st, 2004 20:00
Set USB emulation to NO BOOT, system will quit trying to boot to you printer.
DaGeezerUS
DELL-Donald K
#IWork4Dell