UNSOLVED

DMath

updated

19 years ago

D

DMath

1 Message

0

107954

May 22nd, 2007 22:00

Samsung SyncMaster 920nw ... trying to get to 1400x900

I just unpacked a Dimension E520 and a Samsung SyncMaster 920nw but I cannot get to the suggested resolution of 1400x900.  It's on an NVIDIA GeForce 7300 LE card.  When hiding modes the monitor can't display, I can only get to 1360x768 and truly, the only resolution that looks decent is 1152x864.  If I allow all modes, it goes from 1360x768 to 1600x1200 and above.  Nothing other than 1152x768 looks good.
 
I've loaded the latest monitor drivers from Samsung and latest display adapters from NVIDIA.  Any suggestions?
  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    1396

    0

    Posted May 28th, 2007 18:00

    DMath,

    The Samsung SyncMaster 920nw specifications say the maximum resolution supported is 1440 x 900. It looks like the video card is the is culprit here. You can try to setup a custom resolution/timing in the NVIDIA control panel.

    * Right click the PC desktop
    * Click Properties
    * Click the Settings tab
    * Click the Advanced button
    * Click your video card tab (Nvidia)
    * Click Classic NVDIA Control Panel
    * After that menu appears, click Screen Resolutions and Refresh Rates
    * Click on the Add tab (you will have to scoll down to the disclaimer and click OK before can make changes)


    DELL-Chris M (old account)

    #IWork4Dell

  • shimi002

    1 Message

    1396

    0

    Posted May 30th, 2007 19:00

    I am having the same problem with a Dimension E521 and the same video card.  I do not see a "Classic NVidia Control Panel" and I cannot find a "Screen Resolutions and Refresh Rates" option.  There is a "Performance and Quality Settings" option, but I don't see any way to enter a custom resolution.
  • byker49

    1 Rookie

    •

    569 Posts

    1396

    0

    Posted May 31st, 2007 19:00

    If your video card does not offer a resolution of 1440x900 or 1680x1054, you can try setting your monitor to the pre-set resolution closest to 1440x900 or 1680x1054. If this does not give satisfactory results, see Note 1 below.

    Note 1: In some cases, you can download an updated video card driver from the manufacturer of your video card which will let your card provide a resolution of 1440x900 and/or 1680x1054. Alternately, you can replace your existing card with a video card that provides 1440x900 and/or 1680x1054 out of the box. For a list of video cards that provide resolutions of 1440x900 and/or 1680x1054, click HERE.

    I copied this from the Samsung site. Hope it helps.

  • RDPollard

    2 Posts

    1396

    0

    Posted June 6th, 2007 05:00

    I'm experiencing the exact problem (I just spent two and a half hours with support...wish I would have seen this post earlier).  The three techs I spoke with are all scratching their heads over it.  So what is the final verdict?  Is the video card that came with the PC just not good enough for the monitor...that...hmmm...also came with the PC?
     
    Should I box this puppy back up?
     
    Thanks.
     
    Edit:
     
    I am also running an E520 w/ the GeForce 7300 LE and the Syncmaster 920nw.


    Message Edited by RDPollard on 06-06-2007 01:43 AM
  • 1396

    0

    Posted June 6th, 2007 17:00

    Wish I have seen this post before I purchased another card :( Thanks for sharing.