
UNSOLVED
PSU problem?
My CPU is randomly rebooting after installing the 6600GT AGP.
I thought it was a PSU problem, but people on the forums tell me my Dell Dimension 4600i can handle it just fine...
99% of the time, it happens when I minimize or close a window, I can game for 2 hours, clocked at 570 / 1260, and it will be fine. I use standard clocks, or underclock to 300 / 500, and it'll still reboot...
Idles at 45C BTW, load at 70C.
So is it a PSU problem?
When I reboot I sometimes get...
02/08/0 error allocating mem bar to pci device (at dos bootup)
And when I install gpu drivers, after entering windows it says "New hardware found PCI Memory Controller" (could this be it?)
Could it be drivers that I need??...
SUGGESTIONS?
I NEED to know, because I may get fans / a new PSU if I need to tomorow.
Enermax or startech better? And what fans are good for a 4600 case?
http://www.gtcomp.com/gtonline/Haze/index.asp?CartId=241311FVZWR13
that site only, as I will be buying locally.
I thought it was a PSU problem, but people on the forums tell me my Dell Dimension 4600i can handle it just fine...
99% of the time, it happens when I minimize or close a window, I can game for 2 hours, clocked at 570 / 1260, and it will be fine. I use standard clocks, or underclock to 300 / 500, and it'll still reboot...
Idles at 45C BTW, load at 70C.
So is it a PSU problem?
When I reboot I sometimes get...
02/08/0 error allocating mem bar to pci device (at dos bootup)
And when I install gpu drivers, after entering windows it says "New hardware found PCI Memory Controller" (could this be it?)
Could it be drivers that I need??...
SUGGESTIONS?
I NEED to know, because I may get fans / a new PSU if I need to tomorow.
Enermax or startech better? And what fans are good for a 4600 case?
http://www.gtcomp.com/gtonline/Haze/index.asp?CartId=241311FVZWR13
that site only, as I will be buying locally.
Message Edited by adbui on 11-12-2005 12:18 AM
Message Edited by adbui on 11-12-2005 12:19 AM
Responses (2)
Solutions (0)
shesagordie
12 Elder
•
46017 Posts
146
0
Posted November 12th, 2005 21:00
adbuiGo for the Enermax, As the D-4600 has an open back, you can use most standard generic ATX PSUs, with or without the on/off power switch.Bev.

sirjv
115 Posts
146
0
Posted November 12th, 2005 04:00