
Solved!
Go to SolutionD
damtrung_hp
1 Rookie
•
1 Message
1
611523
December 9th, 2009 01:00
Error DELL 755
Dear Dell Support !
I have a PC DELL 755. When it reboot, it have a notice: " The system management hardware requires a reset.System setup configuration and the date/time require attention after the reset.
Strike the F1 key to continue,F2 to run the setup utility
Press F5 to run onboard diagnostics "
I had check all hardware, replace battery CMOS, load defalt factory BIOS .... but not ok. still notice this error.
I want to knows what hardware is error? how to solve this problem.
Thanks for reply !
<ADMIN NOTE: Email Id Removed Per Privacy Policy>
Responses (14)
Solutions (0)
fluxblocker
16 Posts
43096
0
Posted February 9th, 2010 09:00
I just had the same issue. Optiplex 755. Anyone in the Dell community able to shed some light on this?
We would certainly appreciate it.
TIA,
Sam S.
I've got an Optiplex 755 exhibiting the same behavior. Received a warning "System Battery Voltage Low".. so I replaced the motherboard battery (CR2032 3.volts) and on next reboot received the same error damtrung_hp noted (above). Upon trying to boot the system, Windows XP is now BSOD'ing. ;( ... Going to test the hard drive in another 755,.. assuming that works, I'm not sure what else to do besides submit this unit for a motherboard replacement. (because I'm not finding any software download tools to reset the system management hardware)
I experienced the same string of events. CMOS battery died. Replaced with new battery. Got the same message at boot up.
"The system management hardware requires a reset.System setup configuration and the date/time require attention after the reset.
Strike the F1 key to continue,F2 to run the setup utility
Press F5 to run onboard diagnostics "Resolution: I found that if I entered the asset tag into the BIOS and saved it, the message went away and system returned to normal.
abra alguna solución para este problema , intente con todos los resultados que hay en este post. pero no se arregla el problema. o simplemente ya se daño la placa....???
"El hardware de administración del sistema requiere una configuración setup reset.System y la fecha / hora requieren atención después del Reset.
Presione la tecla F1 para continuar, F2 para ejecutar la utilidad de configuración
Presione F5 para ejecutar el diagnóstico a bordo "
favor de responder si, encontraron alguna solución certera...!!!
Hello, I've tried this fix but every dumb password I put in says it's rejected. I'm able to use the "admin" one to get into the management screen but it won't let me change the password. Can you tell me what you used or a version of it? Or do you know the password requirements? Thanks!! Ron

1Kapila
1 Message
43192
2
Posted July 3rd, 2012 11:00
I have tried different and it did work!!,
following explains how to reset system management hardware
Press Ctrl-P while booting up
Management Engine will open
use 'admin' as password
you are required to setup a new p/w, do it.
it will prompt and say if you do it will reset, thats what we needs!
then exit,
once restarts, error message disappears!! now you can install os as usual.