UNSOLVED

jfish99

updated

18 years ago

J

jfish99

5 Posts

0

21635

March 27th, 2009 05:00

4700 Memory Problems

I have a Dell Dimension 4700 - when I boot up nothing on screen, the diagnostics lights are

 

A & B = Amber

C & D = Green

Which is memory issue, therefore I have purchased more memory and inserted them in the motherboard still get the same error

Booting up without memory I get the usual POST error beeps

But with good memory it doesnt start/boot up

Is the motherboard faulty or another componenet, as the new memory I have tried makes no difference

I have made sure to add 2 same size memory in slots 1 and 3.

  • jfish99

    5 Posts

    856

    0

    Posted March 27th, 2009 06:00

    Hi

    nothing on screen, fans are running and the green light on the front of the base unit on

    yes I have gone thru various permutation of memory configuration, only using 1 DIMM in slot 1 - I have 2 x 256 and also 2 x 512 all confirmed to be working in another PC

    is the motherboard dead ?

  • ddd1ddd

    126 Posts

    856

    0

    Posted March 27th, 2009 06:00

    jfish99

    Welcome to the Dell forums!

    When you boot up, do you see nothing at all, the screen remains totally black? Can you hear fans running? Have you tried removing all memory, and placing your old memory one at a time and booting?

  • ddd1ddd

    126 Posts

    857

    0

    Posted March 27th, 2009 08:00

    jfish99

    Maybe

    Power down and open case. Replace memory as it was originally. inspect and reconnect the wires coming from the PSU to various components. Do you have a stand alone video card? If so, remove and re-seat it. Reconnect everything and re-test. Still nothing? Take a video cable and monitor from a working system and switch them for yours; re-test. Still nothing? What beeps do you hear (pattern)? Re-post.

  • Irish2009

    134 Posts

    857

    0

    Posted March 27th, 2009 08:00

    Almost sounds like you might have bad memory slots on your motherboard. Can you just insert one of the memory sticks in a slot and does it do the same thing?? Have you tried different slots with the memory?

  • ddd1ddd

    126 Posts

    857

    0

    Posted March 27th, 2009 09:00

    You don't want ECC RAM.

    I was hoping you could take a video cable and monitor from another system and try them, together, on yours; as well as other tests previously mentioned; and re-post.

  • jfish99

    5 Posts

    857

    0

    Posted March 27th, 2009 09:00

    Hi

    I have gone thru various memory config

    with memory in old slot 1 then only in slot 2 then only in slot 3 then only in slot 4 - same problem - this with all the memory I have.

    I have tested with the existing memory and also with the new memory

    however just now I had some ECC Reg RAM, inserted that into the motherboard and the BIOS beeped complaining about the ECC memory inserted.

    the video card is on board - dont have a spare video card to test

  • jfish99

    5 Posts

    856

    0

    Posted March 27th, 2009 10:00

    the video cable/monitor plugged into my Comaq desktop and IBM ThinkPad laptop work fine, therefore nothing wrong with the video cable/monitor.

    as the video is on board - dont have a spare video card to test - think I need a PCi Express card as well .. will see if I can borrow one from somebody and test it out

  • ddd1ddd

    126 Posts

    856

    0

    Posted March 27th, 2009 15:00

    To be clear, I understand you to say that when you try to start your computer, nothing shows up on your monitor at all, stays black; but the fans and lights come on. The MB appears to have a problem. Installing a video card is an idea, but how can you go into the BIOS and change on-board graphics to PCI-E; when the BIOS screen never appears?

  • pro31

    6 Posts

    856

    0

    Posted March 27th, 2009 16:00

    Remove all of your usb connections they are most likely causing a conflict, then once to get to the desk top add then reboot the system, to ensure that each one is working!  Also reseat your memory and reboot

  • pro31

    6 Posts

    184

    0

    Posted March 27th, 2009 16:00

    Remove all of your usb connections they are most likely causing a conflict, then once to get to the desk top add one then reboot the system, to ensure that each one is working!  You should get all green lights! Also reseat your memory and reboot