UNSOLVED

iLLcAtTiViSsiMo

updated

12 years ago

0

194786

January 13th, 2015 16:00

PCIE GEN3

Just noticed this is disabled in my BIOS. I have an MSI GTX 970 4G, which is PCI-E 3.0 compatible. Should I enable it?

  • Milena M458

    6 Operator

    •

    2699 Posts

    3338

    0

    Posted January 14th, 2015 10:00

    If you enable the PCIE Gen you might get instability, if you want you can enable it however if the system start giving you problems it will be better to disable it.

    The system will run Gen 3 speeds even though you see that option is disable in the BIOS 

  • morblore

    2 Intern

    •

    2447 Posts

    3338

    0

    Posted January 16th, 2015 18:00

    Just noticed this is disabled in my BIOS. I have an MSI GTX 970 4G, which is PCI-E 3.0 compatible. Should I enable it?




     
    Nice card BTW /wink 

  • morblore

    2 Intern

    •

    2447 Posts

    3338

    0

    Posted January 16th, 2015 18:00

    So what you are saying is even if it is off ( disabled ) it is still on? 

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    3338

    0

    Posted January 17th, 2015 12:00

    Just noticed this is disabled in my BIOS. I have an MSI GTX 970 4G, which is PCI-E 3.0 compatible. Should I enable it?

    What make and exact model computer do you have?

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • Incompressible

    1 Rookie

    •

    103 Posts

    3338

    0

    Posted January 17th, 2015 12:00

    Run GPU-Z, It will tell you the actual Bus Interface speed your graphics is running at. This will answer all your questions.

    I know for a fact that 2nd gen Intel core processors will run only at pci gen 2 speed even if gen 3 is enabled in bios.  You'll need a 3rd gen processor or higher to run at gen 3 (of course, your GPU has to support gen 3 as well).

  • 3338

    0

    Posted January 17th, 2015 14:00

    It's an Aurora R4.

    I've OC'ed my i7-3820 to 4.2 GHz and went with a Corsair H75 cooler in place of the stock one. I also upgraded to 16GB of G.Skill Ripjaws X Series 1600MHz 9-9-9-24 RAM. (XMP makes things very easy lol). Finally, I replaced the stock PCI-e fan with a 3 pin fixed speed 120mm Cooler Master fan, which just barely fits. My temps are insanely low. I always thought the PCI-e fan shroud was supposed to improve cooling. Much to my surprise, using a larger front fan and giving the Twin Frozr fans on my GPU some "room to breath" by removing the shroud has dramatically decreased all temps under load and idle. I've verified this by reinstalling the stock equipment and seeing high temps again. All testing was done with controlled ambient temps and equal game/benchmark testing) Very happy with my current set up.

    It is the Au"ROAR"a no more. Now, its' just the Aura. =) lol I certainly don't miss the annoyingly loud stock fans at all. My PC runs whisper quiet now, has MUCH better cooling and has better benchmarks using 3DMark. I definitely see a much more stable FPS in cpu intenstive games like Arma 3 since nothing has to throttle back due to high temps. (I always thought that was a myth, TBH)

    Everything is perfectly stable and I don't think I will be enabling the PCI-e 3.0 unless someone can convince me otherwise. From what I've read, there is virtually no performance gain, unless running multiple GPUs anyway. (i.e. SLI).

    For anyone that's interested:

    CPU idle temps are 27-30 degrees, 58 max under load and only for short durations. My GPU fans are designed to stay off (yes, OFF) until temp hits around 60 degrees. Due to this, my GPU idle temps vary from 30-45 degrees, but barely exceed 60-68 degrees under load thanks to the larger PCI-e fan assisting it.

    I do NOT use alienware command center for fan controls. I let active windows cooling policy handle my temps and so far I'm happy with the numbers. Command center had issues up the wazoo. For example, sometimes, I'd turn my PC on and the fans were stuck on full blast! I've yet to encounter any fan issues since it's uninstallation. Besides, I really like the quick boot up now. ;) Never was a fan of bloated software, especially on my gaming set ups.

  • morblore

    2 Intern

    •

    2447 Posts

    3338

    0

    Posted January 18th, 2015 16:00

    iLLcAtTiViSsiMo

    Just noticed this is disabled in my BIOS. I have an MSI GTX 970 4G, which is PCI-E 3.0 compatible. Should I enable it?

     

     

    What make and exact model computer do you have?

     


    Is this the setting the Aurora guys wanted when PCIe3 cards came out? It was thought the UEFI with Gen3 bios didn't work with gen2 bios cards and a mobo bios was needed? They could not get the new cards to work. Remember that? So...last gen people can't use new cards and the new guys get a setting they will never use? Did I miss something here?

  • JasperY

    2 Posts

    3338

    0

    Posted January 24th, 2016 06:00

    Hi, I am having issues with my Titan Z setup on the Aurora R4. I had PCIe gen 3 support active in the BIOS, and it made my graphics drivers reboot on graphic intensive applications, because the GPU was missing power with the stock 875W PSU.

    You can try activating it but if you get crashes when the GPU reaches 100% usage then deactivate it.