NontTheKiller

updated

8 months ago

Closed

N

NontTheKiller

1 Rookie

•

5 Posts

0

16733

October 7th, 2021 08:00

Latitude 7480: Alert! TPM device is not detected

Hello everyone, I have some problem with my Latitude 7480. When I booting up the laptop I see the error message say “Alert! TPM device is not detected”. So I go to google and follow the dell article about the TPM but the solution is not working. I have tried turn off the laptop and disconnected the AC Cable and wait for 30 seconds but still have the same problem, and I cannot update the tpm in windows 10 too.

The TPM Version is V.1.3.2.8 A02

And Bios version is 1.22.0

Can anyone help me?

Sorry for my bad English.

Edit: I only want TPM for Windows Bitlocker only, I know that my laptop is not support by windows 11

  • DELL-Nat M

    Community Manager

    •

    3805 Posts

    •

    21481 Points

    0

    0

    Posted March 16th, 2026 19:02

    If you have been experiencing TPM issues recently, please review this wiki. The steps provided should help resolve the issue.

    Fix - “TPM Device is Not Detected” on Dell Inspiron Laptops

    If you are still experiencing problems after completing the steps:

     

    • In warranty – Click Get Help Now at the bottom-right corner of this page to get support.
    • Out of warranty – Start a new discussion using the option at the top of this page.

    (edited)

    #IWork4Dell

  • U2CAMEB4ME

    6 Operator

    •

    6245 Posts

    9475

    0

    Posted October 7th, 2021 19:00

    Welcome to the Dell Community @NontTheKiller 

    Make sure TPM is enabled in the BIOS.

    If already enabled try to "Clear" the TPM.

    Best regards,

    U2

    NOTE:

    Your system will run W11 with no problem.

     

  • NontTheKiller

    1 Rookie

    •

    5 Posts

    10084

    0

    Posted October 7th, 2021 20:00

    Thank you for your reply. I cannot see the TPM option in BIOS so I cannot clear the TPM and I check my system configuration in dell website and it said that my laptop is come with TPM Enable.

    I cannot run windows 11 because I have a i5-7200u it a 7 generation so it not support by windows 11.

    Regards,

    Nont

  • coolspot18

    1 Rookie

    •

    1 Message

    10150

    0

    Posted October 7th, 2021 21:00

    This is a known issue with the 7480 ... seems like the TPM dies, nothing can fix it except a motherboard replacement.

    You can pulling the battery for 30 - 60 seconds and see if that revives your TPM.

  • NontTheKiller

    1 Rookie

    •

    5 Posts

    10131

    0

    Posted October 8th, 2021 00:00

    Ok I will try

  • NontTheKiller

    1 Rookie

    •

    5 Posts

    10113

    0

    Posted October 8th, 2021 19:00

    Thank you for your suggestions but it doesn’t work on my device.

    Thank you very much

  • webcity

    1 Message

    10074

    0

    Posted October 15th, 2021 03:00

    Hi NontTheKiller,

    I have a LATITUDE 7480 like, with a BIOS version 1.19.0 installed.

    I can confirm that in BIOS version 1.19.0 the "TPM 2.0 Security" Menu under "SECURITY" is still present. I can enable "TPM On" or disable it and I can enable "Clear" option too. Everything is working.

    You can try to downgrade your BIOS Version from 1.22 to &.1.19 to check if the TPM device is detected and can be managed again ?

    For your information, I want to update my BIOS Version from 1.19 to 1.22 without success. I've tried in DOS and in Windows, BIOS can't be updated, my laptop restart without error, and I never see the updating process. 

    Did you realize the update easily ? Something special to do before ?

    Thank you very much

  • NontTheKiller

    1 Rookie

    •

    5 Posts

    10027

    0

    Posted October 19th, 2021 18:00

    Thank you for your answer but I downgrade the bios to 1.19.0 but still it not detected. Before TPM is not detected I trying to update the TPM I just click clear TPM In bios when it reboot it not detected anymore

  • Yunky2022

    1 Message

    9177

    0

    Posted December 20th, 2021 05:00

    Hi @NontTheKiller ,

    I would be very grateful if you can tell me if you fixed your problem and how ?
    I'm still struggling with it.

    Many thanks

     

  • Zavrikoff

    1 Rookie

    •

    2 Posts

    8424

    1

    Posted January 26th, 2022 13:00

    This message has been getting on my nerves for a couple of years now.