I have a IA WIM that when restored to the PC (Optiplex 9020) that created it works fine, but restoring it to other models (ex. Latitude 6420 &6440), I get a 0x0000007B BSOD upon the first boot (during the Starting Windows animation). When it restarts, launching startup repair gives an error 0xc000000e.
The original PC is set to RAID On in SATA Operation, and every other PC has been set to that, yet it does not boot.
Please make sure that the correct family driver packs, downloaded from the ImageAssist page, are placed in the folder "dell_driver_packs_local" on the bootable USB key created with ImageAssist for the models BSOD'ed. Also the SATA setting may need to be changed to ATA or ACHI and not RAID ON.
ed_goldberg
43 Posts
645
0
Posted June 13th, 2017 09:00
Willabraham,
Please make sure that the correct family driver packs, downloaded from the ImageAssist page, are placed in the folder "dell_driver_packs_local" on the bootable USB key created with ImageAssist for the models BSOD'ed. Also the SATA setting may need to be changed to ATA or ACHI and not RAID ON.