Solved!
Go to SolutionRV
ricardo.vervaart
1 Rookie
•
5 Posts
0
988
February 28th, 2024 23:48
Equallogic PS4100 reset password
hi i have a decommissioned Equallogic PS4100
how ever no one knows the pass.
i woud like to use it again but. after reading some discussions im a bit lost.
i do have a serial cable
ricardo.vervaart
1 Rookie
•
5 Posts
0
0
Posted February 29th, 2024 17:42
@dwilliam62 thank you this worked for me
if that link died here are the instrutions.
1) Console on the Equallogic and powercycle the device
2) Press CTRL+P on boot
3) Use the following commands:
EQL> setenv RESETPASSWORD 1
EQL> reloadThis should reset the password back to defaults =>
Username: grpadmin
Password: grpadmin4) Reset the password
account select gpradmin passwdYou will then be prompted for the new password
dwilliam62
6 Operator
•
1516 Posts
•
6374 Points
0
0
Posted March 1st, 2024 00:49
You are very welcome! I am glad you were able to reset it.
Regards,
Don
#iworkfordell
dwilliam62
6 Operator
•
1516 Posts
•
6374 Points
0
0
Posted February 29th, 2024 01:56
Hello,
This page shows how to do it via the serial port. https://www.jordansphere.co.uk/reset-equallogic-password-via-cli/
You will have to be on the active CM and very quick hitting CTRL-P It might take a few attempts
Regards,
Don
#iworkfordell