timbo475

updated

17 years ago

T

timbo475

11 Posts

1

1701

July 20th, 2009 16:00

More info on AX4-5 regarding vault disks

Hi,

I'm new to the whole EMC array thing so will possibly be asking a few basic questions at this point. We've got an AX-5 with dual SC. It will most likely be an ESX backend (as well as a bit of storage for various types of servers)
I'm try to get to grips with the AX4-5 and trying to understand the whole vault disks thing. I understand disks 0-3 are the vault disks and contain system software, etc. but have a few questions:
- Why are 4 disks necessary?
- Out of the box, no disks have been configured in RAID sets so which disks have the software installed on them currently?
- How do people usually configure these 4 disks? I was speaking to someone about these disks and thet mentioned they create 2 mirrors out of these 4 disks, although they couldn't tell me why.
- Do people use these disks for anything else other than CLARiiON software? There are 4*146GB disks and depending on how they should be configured this could leave a fair bit of wasted space (or does the software take a large space on the disks?).

I've read through various bit of documentation for the array but can't find anything that might answer these questions so nay help would be great.

Cheers,

Tim
  • RyanP2

    261 Posts

    980

    1

    Posted July 23rd, 2009 07:00

    We, being EMC, steal space from the first few drives to put the SP OS on them. This happens so if you replace both SPs the image is still on the box and the SPs will boot. If you have a 146GB drives say, we'll take a portion of it and you see less space than what you may think you should have. This is hidden and you'll never be able to touch this space.

    You can put a raid group on the drives (across just those 4 or even more if you like), but the suggestion is to only put low transaction items on those drives as the OS is on them.

    -Ryan
  • Alastair2

    16 Posts

    980

    0

    Posted July 21st, 2009 01:00

    Hi Tim,

    The Vault disks are an invention first used on Clariion to store cache data in the event of an array crash. It is now used also on the new Symmeterix arrays. This space is preconfigured and can't be changed. It always uses the first disks in tray 0. The Flare is also stored there and other system stuff.

    On CX, these are raid-5 (3+1) if I remember correctly. I don't see why AX should be different.

    You can use the rest of the space on these disks for user data but would be recommended NOT to put an intensive IO LUNs on there.

    Hope this helps,
    Alastair
  • RRR

    6 Operator

    •

    5739 Posts

    980

    1

    Posted July 21st, 2009 03:00

    On CX's the first 5 disks are for Flare code and Cache vault. The set up contains mirrors and tripple mirrors of important software the CX runs on. The remaining part of each disk can be configured as RAID 5(4+1) or in fact anything you want, although the best practice is RAID5 and put some light IO generating data on them, since the Array itself also consumes some IO for it's operating system.
  • timbo475

    11 Posts

    980

    0

    Posted July 21st, 2009 17:00

    Thanks for that. It doesn't look like the vault disks are configured in any sort of set yet, looking at Navisphere Express; at least there are no disk pools configured and the vault disks are available for a disk pool.
    I find this a bit confusing. If you can configure the vault disks in a pool why would the first 4 disks be reserved? Why does it need 4 disks? What's stopping my configuring disk 0 and 1 in a mirrored pool and then using disks 2 & 3 for something else? I'm not really understanding it.

    Is there any documentation anywhere? The HW overview goes into very little details about these disks other than saying they are the vault disks and used for the system.

    Cheers,

    Tim
  • RRR

    6 Operator

    •

    5739 Posts

    980

    0

    Posted July 22nd, 2009 00:00

    I'm not saying you can't create raid1's, I merely said that it's a best practice to create a RAID5 that covers all the vault drives.
    Remember that the Flare / Vault disks cannot be used fully, since that would have an effect on the array performance and raid1 is primarily used for performance solutions. But you can create anything you'd like
  • RRR

    6 Operator

    •

    5739 Posts

    980

    0

    Posted July 22nd, 2009 06:00

    Welcome to the forums Tim,

    please introduce yourself in the coffee break :)
  • timbo475

    11 Posts

    980

    0

    Posted July 22nd, 2009 16:00

    RRR - I may have missed what you were saying. So effectively the Flare area is already setup as a predefined disk pool that you cannot actually see?
    If the vault disks are setup in RAID by me, this is a seperate disk pool from the 'built-in' system disk pool - is that about right?

    Cheers,

    Tim