Everything you need can be found on EMC Powerlink then follow

Thanks for reply, but in there "

     Home >               Support >               Technical Documentation and Advisories >               Hardware/Platforms Documentation >               CLARiiON AX Series Systems >               CLARiiON AX4 >          Installation/Configuration >"

there are only 2 papers. None are helpful to my purpose. in this 2 paper there is nothing mention about the initialization/configuration of ax4-5fx array. If you can point out me any other document in this forum it will be helpful.

Regards

Masud

Hi Masudul,

So you already got the customized documents like AX4_Planning_Your_AX-Series_Storage-System_Configuration-_Master_xxxxxx.pdf and AX4_Installing_an_FC_Storage_System-_Master_xxxxxx.pdf from AX4-5 support site?

The following are the main topics in the installation guide (I chose Windows OS in the configuration chooser),

  Verifying the storage-system parts
  Connecting the storage-system expansion ports
  Connecting power cables
  Powering up the storage system
  Connecting the storage-system management ports to the LAN
  Confirming hardware installation
  Initializing the storage system
  Resetting the storage-system security settings
  Upgrading storage-system software
  Registering the storage-system configuration with your service provider
  Installing HBAs in the server
  Installing or updating the HBA driver
  Installing PowerPath on a server
  Installing Unisphere server software
  Installing and setting up the Fibre Channel switches
  Connecting the storage-system Fibre Channel data ports
  Registering the server with the system
  Configuring a new storage system
  Verifying your high-availability Fibre Channel configuration
  Preparing virtual disks to receive data
  Sending Windows server and Windows virtual machine disk information to the system
  Verifying your failover configuration with PowerPath

If these guides do not help you please describe more about your requirement so that we can help you better. Thanks.

I have some document from powelink site but not from AX support Site (http://www.emc.com/microsites/clariion-support/ax45-install.htm). Can u point out me the document number there.

As my requirement is 1st cabling (we have 1 SPS (single SP),1DPE,1DAE) FC connection. after that how can we initialize through serial management port....how is the connection established from my workstation that i can set the user name password IP. After that how can we login to EMC array through we browser to config the LUN to share it in the SERVER, which software is needed in server side to register the host to storage.....pretty basic thing .

Masud

You can create the customized planning and installation documents by clicking "Plan" and "Install" on that page, the guides will be tailored to your own environment so that I could not point out the exact links for you. What you need to do is choosing the storage model, connection type, server OS, path managment software, etc. Then you can send the generated document to your email or download it directly.

Thanks for the guidance,

Also can you tell me pretty basic to configure ax4 series array, I think at 1st I have to connect the array DPE with micro DB9 connector to established a PPP connection to log in the array with 192.168.1.1/setup, after that i have to set the IP of both SP. What about the Host side connectivity with DAS connection, which software needed to install (assume navispher agent) and then we can start using the EMC array with navisphere express edition from GUI. Windows version is WIN2k8.

correct me if may wrong.

Masud

Please help me on this issue.

Hi Masud,

     You have to access partner website in order to download these utilities. You may browse to powerlink > support > service partner web > software .

     Vipin V.K

Thanks Roger for replying.

Where can i find those software from powerlink.emc.com....as far my finding in powerlink.emc.com site i cant find the above typed software like: Unisphere Initialization Utility (Solaris SPARC/x86), Unisphere Host Agent (Solaris SPARC/x86). There is USM i can find and its for only windows host.

Regards,

Masud