UNSOLVED

maheshtata

updated

15 years ago

0

937

May 1st, 2011 08:00

CX300 replace 15k disk in place of 10k

HI all,

we have a failed drive 146GB which is 10K . We have 146GB 15K drive in hand , can we replace the failed drive with 15k one ? if it works, do we run in to any issues in the future ? I would greatly appreciate your experiences here..Thanks

.

  • DanJost

    190 Posts

    366

    1

    Posted May 2nd, 2011 05:00

    That shouldn't be a problem - when I have a "dead" 10K disk EMC has replaced these with 15 drives in the past.  In fact, they've replaced 2Gbit drives with 4Gbit-capable drives as well...

  • RRR

    6 Operator

    •

    5739 Posts

    366

    0

    Posted May 2nd, 2011 07:00

    No, a 15k drive won’t suddenly spin at a lower speed !! Power ON means 15,000 RPM.

    The drive’s motor will simply keep on spinning at 15k. What you’ll get is a mix speed raid group, so performance of the raid group will be better than a full 10k RG, but less than a 15k RG.

  • SKT2

    2 Intern

    •

    1340 Posts

    366

    0

    Posted May 30th, 2011 16:00

    I always love RRR's theory

  • RRR

    6 Operator

    •

    5739 Posts

    366

    0

    Posted May 30th, 2011 23:00

    Theory ?

    Anyway: thank you

  • sculpture1

    23 Posts

    366

    0

    Posted May 31st, 2011 06:00

    Hi,

    I believe in RRR's theory if you still wanna call it a theory

    Tried it before and worked fine.

    Best Regards,

    Hisham Shehab

    Sr. Technical Consultant, Data Center & Storage

    P.O. BOX 220218, Riyadh 11311 Kingdom of Saudi Arabia

    T96612154184 | F96612154181 | M+966500024753