UNSOLVED

bfonseca1

updated

18 years ago

B

bfonseca1

1 Rookie

•

26 Posts

0

497

March 4th, 2009 15:00

Adding more disks to AX110

I have a AX110 that needs more storage space. I still had a 7 slots available to we just decided to populate all the slots. I want to make another disk pool and then create a bigger virtual disk, move my data and share it again with the same share name.

In navisphere this looks pretty easy but do I have to do anything else. Do I have to touch powerpath at all? I am somewhat familiar with the administration of it, although I don't do it often. Can anyone provide any knowledge, and yes I obviously have a full backup of the data before I start.
  • BoDiddly1

    1 Message

    273

    0

    Posted March 18th, 2009 10:00

    It's my understanding the Powerpath software is only necessary if you want redundant paths to the device. I have an AX150 model and don't even use Powerpath software since I only have one connection to the box through a gigabit NIC and have never had a bottleneck issue regarding I/O. So my answer to your question would be simply configure it through Navisphere and only worry about Powerpath if you are currently taking advantage of it's capabilites.
  • hshehab1

    16 Posts

    273

    0

    Posted March 19th, 2009 00:00

    It's all done through NAVI, you don't have to do nothing with PowerPath.