
UNSOLVED
m17 R3, SupportAssist OS Recovery BSOD KERNEL_SECURITY_CHECK_FAILURE (0x139), fixed by switching SATA to AHCI
SupportAssist OS Recovery crashed with KERNEL_SECURITY_CHECK_FAILURE (0x139) every time. It crashed from a USB made with Dell OS Recovery Tool and from the built-in recovery, with both the Windows 10 and Windows 11 images. A standard Microsoft Windows 10 USB installed fine.
What didn't help: recreating the USB, using a different USB port, disabling Secure Boot, reflashing BIOS 1.37.0, and downgrading to 1.35 and 1.33.
(edited)
Responses (1)
Solutions (0)

Maabad
1 Rookie
•
2 Posts
•
7 Points
6
0
Posted October 15th, 2026 22:05
The fix: in BIOS (F2), go to Advanced > SATA Operation, change "RAID On" to "AHCI", and save with F10. The recovery USB then booted normally. My laptop has two internal drives, which may be related.
Note: a Windows install made in RAID mode may not boot after switching to AHCI. Switch back to RAID On to boot it.
(edited)