UNSOLVED
A
a2samenwerking
1 Rookie
•
4 Posts
0
1494
October 30th, 2017 03:00
Resolution settings in username.ini not applied
I want to set the default resolution to DDC and for some users a specified resolution. I can't get it working.
I've created a wnos.ini with settings:
Screen=1 Resolution=DDC
Screen=2 Resolution=DDC
And a username.ini with settings
Screen=1 Resolution=1440x900
Screen=2 Resolution=1440x900
The default DDC resolution is applied but the resolution in username.ini is not.
I can get it working when I change the wnos.ini settings to:
Screen=1 Resolution=1920x1080
Screen=2 Resolution=1920x1080
The problem is that some monitors do not support the 1920x1080 resolution. That's why I want to use DDC as default setting.
RMontalvo
2 Intern
•
560 Posts
1235
0
Posted October 30th, 2017 09:00
A2,
the correct format is as follows:
DualHead=Yes \
ManualOverride=Yes \
Mainscreen=1 \
Orientation=Hort \
Taskbar=Mainscreen \
Align=Bottom \
EnsureDplsOn=Yes \
MonitorAutoDetect=Yes
Screen=1 Resolution=DDC
Screen=2 Resolution=DDC
You may want to verify that your firmware version is at least 8.4_110.
Also keep in mind, that if you are using a USERNAME.INI and a WNOS.INI, the USERNAME.INI is executed first, so if you have a Resolution parameter in the WNOS.INI, it OVERRITES the previous parameter.