UNSOLVED

koche005

updated

12 years ago

K

koche005

5 Posts

1

10324

July 10th, 2014 11:00

Venue Pro 11 stylus headache

7130, Bios A10, Stylus dates from April 2014, I think it's the latest version.

It works extremely well when it works, but it often just stops dead.

I unscrew it, take the battery out and put it back together and it works again.

this gets annoying in meetings.

anyone else have this issue?

any suggestions?

  • good2know

    5 Posts

    547

    0

    Posted July 10th, 2014 18:00

    5130, bios A07, Stylus A02, also have such problem for these few days.

    Even re-seat the battery, might not work:emotion-9:

  • 547

    0

    Posted July 10th, 2014 21:00

    take off the head, you will find a small yellow point on the pen shaft,.

    use some small and thin copper plate to extend the area size of point, it will have a good connection to the head screw

  • Berkatse

    2 Posts

    547

    0

    Posted July 10th, 2014 22:00

    Same here, and getting pretty tired of it.  Gone through 2 stylus already, both died after about 30 min of use with new batteries.

  • good2know

    5 Posts

    547

    0

    Posted July 11th, 2014 18:00

    Thx michael, works like a charm:emotion-21:

  • patstar5

    28 Posts

    547

    0

    Posted July 12th, 2014 08:00

    I have problems too with my reva02. It does not work! Replaced the battery and you can see cursor hover but I can't draw/write or select anything!