You could try with the Dell Troubleshooting Tool to clear the LC job log.

Not sure if you have the installer but here is a link to the installer.
http://en.community.dell.com/techcenter/systems-management/w/wiki/4172.dell-troubleshooting-tool

##########################################################################

DELL(TM) TROUBLESHOOTING TOOL VERSION 3.4.3 README

##########################################################################
Version - 3.4.3
Release Date - Sep 2015

With Dell Troubleshooting Tool you can gather more information for failure
to discover a network device (for example: Dell servers, clients, or any
other network resources) in the management console (for example: Dell
Management Console, Dell OpenManage IT Assistant, Dell OpenManage
Essentials etc.).

Find causes for discovery related problems for remote devices; run a
protocol specific test for the remote device, and verify results.

It also has tools to: Configure e-mails, Check availability of ports,
run a command on a remote box, send and listen for SNMP traps, and check
for warranty status.

Thank you for the pointer. While this took works rather well, it did not solve the problem. There are no jobs in the iDRAC, even though it "thinks" there are. I dont know where it's getting that information. The only think I can think of is that the LC sent a job to the RAID controller which never completed and the LC is reporting back to the iDRAC there is still a job.

Have you tried to shutdown the machine and disconnect the power for a minute?

Hello,

Alternatively if you are looking for managing storage as such, you can choose to use OMSA. It requires OS though. You can give it a try if you cant resolve this iDRAC way of managing.

https://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=4HHMH 

Thanks

Vivek

I am having the same issue and I'm besides myself confused on this one. 

Going to make a support ticket with dell unless you have had any luck?

I am also having this issue on a Dell R730XD. I am currently unable to perform any configuration jobs as the LC claims that jobs exist. Previous failed jobs were removed, so there are currently none.

Hi MARKGODDARD86,

Thank you for reaching out to us in dell community. Can you try below command from any windows client OS and let us know if it helped. 

winrm invoke DeleteJobQueue cimv2/root/dcim/DCIM_JobService?CreationClassName=DCIM_JobService+Name=JobService+SystemName=Idrac+SystemCreationClassName=DCIM_ComputerSystem @{JobID="JID_CLEANALL" } -u:root -p:calvin -r:https://idrac_ip/wsman:443 -SkipCNCheck -SkipCACheck

Regards,

Dell-Mondeep

Thanks for getting back to me about this issue. I resolved the problem by resetting the lifecycle controller to factory defaults using the lifecycle controller GUI via the virtual console. It took a lot of time to get to this solution and clearly isn't an ideal solution.

Regards,

Mark

I am also having the same problem.

I resolved the problem by running reset on the lifecycle controller.

Resetting the iDRAC, BIOS, and clearing RAID config is not enough.

Do we have any other solutions that doesn't involve resetting via lifecycle controller?

Thanks