UNSOLVED

Sammie4

updated

17 years ago

S

Sammie4

44 Posts

0

1875

August 10th, 2009 09:00

Content of symcfg -sid 0484 -env_data list -service_state failed

THe command produces the below result while the box is up
My question is what output would be received if the box were down.


Symmetrix ID : 000xxxxx0484
Timestamp of Status Data : 05/28/2009 08:06:36

System Bay

No components are in the specified state

Drive Bays

No components are in the specified state

Message was edited by:
MikeMac
Removed Symm S/N
  • Tanwar2

    62 Posts

    928

    0

    Posted August 10th, 2009 09:00

    I believe than u should recieved this message "The specified Symmetrix ID is unknown."


    Sanjeev Tanwar
  • Mabro1

    2 Intern

    •

    666 Posts

    928

    0

    Posted August 10th, 2009 09:00

    Hi Samantha,

    Just to let you know I have moved your post from the Powerlink Lite Users area to the Symmetrix Hardware area as appropriate. This will ensure the right people will see your post and respond.

    Kind regards,

    Mark Browne
    EMC Support Forums Administration.
  • Sammie4

    44 Posts

    928

    0

    Posted August 10th, 2009 09:00

    Okay....so if the symmetrix is completely down what message would I receive?
  • Tanwar2

    62 Posts

    928

    0

    Posted August 10th, 2009 09:00

    This command will give you information about the bay containing the
    failure, and the components which are in failure state.

    symcfg -sid 0484 list -env_data

    aforementioned command will give you status about different modules and you can also check for a particular bay as well.

    I think if a the query is for a particular afected bay from power outage it will shown you down status (or might be degraded status)instead of normal but i don't think it will show u failed status.

    Idealy it shoudn't be show failed in this scenario.EMC guy can replicate ur scenarion in their lab and can let u know exact message command will display.

    and moreover if the whole storage is down,i am afraid any symcli command will run..then .


    Sanjeev Tanwar
  • 928

    0

    Posted April 16th, 2010 06:00

    What could be the reason if I get the error stating unknown code

    D:\>symcfg list -sid 2892 -env_data

    Symmetrix ID               : 000xxxxxxxxx

    Unknown Code

    Message was edited by: KCSCP Removed Symmetrix ID.

  • 928

    0

    Posted April 16th, 2010 08:00

    Do a  "symcfg discover" and try again.