UNSOLVED
Recover point for VM Cluster status issue
Hello
I'm trying to create a POC for RP4VM.
They each deployed two vcenters.
RPA_A was deploy0 as UCS, and RPA_B deployed RP4VM as Vxrail.
RPA_A and RPA_B were configured, and in RPA_A, RPA_B is checked in Remote vRPA Clusters, but RPA_B cannot check the status. Can I know the reason?
1080
0
Posted January 18th, 2022 16:00
For security reasons it is recommended to go to 5.3.2.2. https://dell.to/3IkMRej Are they able to ping each other?
1080
0
Posted January 18th, 2022 16:00
Hi Sam.
Recover Point version is 5.3.2.1
Thanks
1030
0
Posted January 19th, 2022 00:00
Pings between clusters are good.
Do I have to proceed after deleting all the RPA clusters and vRPA to update?
1015
0
Posted January 19th, 2022 10:00
Hello ydkim,
You shouldn’t need to delete anything unless the precheck stats that you need to. Here is a link to RecoverPoint for Virtual Machines 5.3 Documentation Set which has the upgrade process listed in the install and deployment guide. https://dell.to/3KC2e4n
896
0
Posted January 27th, 2022 17:00
Hi
Sorry for the late reply.
I updated it as I gave you the answer, but I found this message in the vcenter.880
0
Posted January 27th, 2022 20:00
vCenters and vRPA have the same NTP server.
Should I change the synchronization method to something else?497
0
Posted January 27th, 2022 21:00
I'm trying to upgrade, and this log. It's different from the displayed version. Can I fix this?
588
0
Posted February 7th, 2022 04:00
What about the plugin server ? did you configure NTP sync during OVA deployment (available in the latest plugin server OVA) ?
DELL-Sam L
Community Manager
•
8147 Posts
•
34706 Points
1081
0
Posted January 18th, 2022 16:00
Hello ydkim,
What is your current version of recover point?