UNSOLVED
T
thehunterrjames
4 Posts
0
5666
April 16th, 2014 17:00
Dell 922 All in One Printer
Just rebooted from factory settings and adding my printer. I download the driver and it unzips and installs. Then it gets to checking the Ink Cartidges. At this point I should already see the icon for printer in the startup menu. I restart the computer and it says it begins to finish the install. Then I get a script error. This system has always installed in the past. Any thoughts
Dell 922 All in one Printer Scanner
Dell Studio Inpiron Running Vista 64
Computer Identifies that there is a USB Connection
I'm usin the Microsoft Firewall
Thank You
PudgyOne
11 Legend
•
30315 Posts
•
106638 Points
345
0
Posted April 16th, 2014 19:00
thehunterrjames,
When you reinstalled the operating system, did you install the Dell System Software(if applicable) and the chipset drivers first? If not, the rest of the drivers will fail to install. How to Download and Install Drivers in the Correct Order
Start with the Dell System Software and the chipset drivers and follow the list.
First run Delete Print Jobs to remove any stuck print job in the queue.
Disconnect the printer.
Download and run the patch(printer cleanup utility) until it prompts you to restart your computer.
Restart your computer. Make sure the printer is removed. Manual Printer Driver Removal
Download the proper Vista drivers. You'll get a message, the printer is not connected. Connect the printer at this time(powered on).
Links to the patch/drivers can be found at...
Dell 922 Photo All-In-One Printer owners thread (W7)
Try reading...
Allow Printer past Microsoft Essentials/Windows Defender
Rick