
UNSOLVED
J
jeffhoward014
15 Posts
0
5817
October 21st, 2013 11:00
R805 8GB DIMMs
Hello -
As memory prices drop for our current-gen servers (R715's and R720's), the memory cost for 8GB DIMMs on our R805's is still fairly expensive. For example, you can get 16GB DIMMs for the R715's and 720's for about $20/GB. However on our R805's it's $46/GB, so more than double.
As far as I can tell, the biggest differences between the R805 and R715 memory is the voltage (1.8v vs 1.5v), and the CAS Latency (5 vs 9), and speed (PC2-5300 vs PC-10600). I know that DDR3 is usually backward-compatible in a DDR2 machine. However I'm not sure on the voltage or CL (CAS Latency).
Has anyone tried PC-10600 1.5v CL=9 DIMMs in their R805's? At more than HALF the cost, it would be a big win for us to get a little more utility out of our R805's.
Thanks,
Responses (1)
Solutions (0)

BotMan
1 Rookie
•
108 Posts
214
0
Posted October 21st, 2013 13:00
You are mistaken. DDR2 and DDR3 use different technologies and are NOT cross compatible. The DIMMs of one standard use sockets unique to that type, and cannot fit in the socket of another.
DDR3 is the current version and is being produced in much higher quantity than DDR2 which is the main reason that DDR2 is so much more expensive. (There are several other reasons, but economy of scale is pretty much the #1 reason... That and of course "because they can".)
Randy