UNSOLVED

kimord

updated

19 years ago

K

kimord

5 Posts

0

19055

January 17th, 2008 22:00

SP220WFP FLAT PANEL MONITOR

I just bought this monitor and am trying to figure out how to show full monitor display in high resoluiton instead of the widescreen. I tried image settings, but I could only get low resolution to fill the display. Would appreciate help. kimord
  • all the facts

    2 Intern

    •

    983 Posts

    1400

    0

    Posted January 17th, 2008 23:00

    This is for a SP2208WFP, anyway general rules apply.

    The monitor should auto adjust in DVI and VGA to 1680 x 1050 at 60Hz. or in your case the maximum resolution for your model number.

    1680 x 1050 at 60Hz (or in your case the maximum resolution for your model number)is the highest and the recommended resolution that will give the most desktop area and the clearest view of text and all.

    If it doesn't auto adjust, look in the video card properties to manually set it to
    1680 x 1050 at 60Hz. or in your case the maximum resolution for your model number.

    How to find that will depend what video card you are using.
    Generally in XP right click desktop>left click properties>left click far right settings tab>left click advanced tab> monitor tab>find monitor resolutions list.
    It also depends if your using XP, Vista or a Mac.

    In the On Screen Display Menu set it to Fill and it should be OK as long as you selected 1680 x 1050 in video card settings first. :) or in your case the maximum resolution for your model number. or maybe you left the 8 out of your model number and it is SP2208WFP.

    Message Edited by all the facts on 01-17-2008 07:33 PM
  • kimord

    5 Posts

    1400

    0

    Posted January 17th, 2008 23:00

    Yes you're right 2208. Anyway, I tried this and it showed the graphics card ATI Mobility x600. No drop down on resolution box other than default monitor. Is this card the problem?
  • kimord

    5 Posts

    1398

    0

    Posted January 18th, 2008 00:00

    OK, I've gotten to the list and the highest resolution is 1280 by 800 32 bit, at 60Hertz, but applying that gave me a small square box desktop on a black background. Pressing the Menu button displays 1024 by 768. I accidentally locked the Menu button, please tell me how to unlock it. thanks.
  • all the facts

    2 Intern

    •

    983 Posts

    1400

    0

    Posted January 18th, 2008 00:00

    If you have gotten that far then click on the "Adapter" tab and look towards the bottom and click on "List all modes", the one line that is highlighted in blue or a color should be "1680 by 1050 True Color (32 bit)60 Hz". That's what you want your monitor set at for maximum performance and clarity.

    Also press your menu button on your monitor, look at the bottom and tell me what the resolution is there, should be 1680x1050 60 Hz. If you see that, and it's at 32bit color in the other tab then it's at top performance settings.

    Whether your video card can do that resolution or not is another matter, I think it can, but post here what you see.

    Message Edited by all the facts on 01-17-2008 08:24 PM

    Message Edited by all the facts on 01-17-2008 08:26 PM
  • all the facts

    2 Intern

    •

    983 Posts

    1398

    0

    Posted January 18th, 2008 01:00

    If you are using the laptop and 2208 at the same time be sure to set it to dual view not clone. Dual view will let you set the resolutions independently of the laptop LCD and the SP2208WFP. Look in video card properties to set up two monitors. That's probably why you are stuck at such a low resolution on the 2208 you are only getting what that laptop lcd wants to do as the primary monitor.

    If you are only going to use the SP2208WFP then choose use a single monitor, select SP2208WFP, not both and don't set up dual view.

    Yep if you using both :)

    That will tech me to assume only one monitor. :)

    Message Edited by all the facts on 01-17-2008 09:17 PM
  • all the facts

    2 Intern

    •

    983 Posts

    1398

    0

    Posted January 18th, 2008 01:00

    Press and hold menu button for about 30 seconds and see if the lock goes away

    or

    Try this and let me know the results -

    * A message appears stating that the OSD and buttons are locked
    * Press the volume decrease and channel up buttons on the monitor simultaneously
    -or-
    * Press the channel up and volume increase buttons on the monitor simultaneously
    * A message appears stating that the OSD and buttons are unlocked

    Those are from other posts here and it's probably not in the manual, even though it should be.
  • gpro

    2 Intern

    •

    2024 Posts

    1398

    0

    Posted January 18th, 2008 01:00

    kimord,

    ATI Mobility x600 ?
    Is your monitor connected to a notebook?
    If so you need to configure dual display settings in Display Properties.
  • all the facts

    2 Intern

    •

    983 Posts

    246

    0

    Posted January 18th, 2008 01:00

    I think gpro has an ATI card, gpro will be able to help you with that. :)

    I use dual view or clone in GeForce nVidia's. My GUI won't be the same as yours.


    If you are using the laptop and 2208 at the same time be sure to set it to dual view not clone. Dual view will let you set the resolutions independently of the laptop LCD and the SP2208WFP. Look in video card properties to set up two monitors. That's probably why you are stuck at such a low resolution on the 2208 you are only getting what that laptop lcd wants to do as the primary monitor.

    If you are only going to use the SP2208WFP then choose use a single monitor, select SP2208WFP, not both and don't set up dual view.

    ALSO POST HERE what worked to unlock that menu.

    I'll assume it was holding the menu button down for 20 or 30 seconds :)

    ATF

    Message Edited by all the facts on 01-17-2008 09:33 PM
  • kimord

    5 Posts

    1398

    0

    Posted January 18th, 2008 01:00

    sorry, I forgot to mention that. yes, the monitor is connected to a notebook. So, what's the configuration for the Display properties?
  • kimord

    5 Posts

    246

    0

    Posted January 18th, 2008 01:00

    KUDOS TO YOU. I GOT IT. THANKS MUCH. kimord