You'll have to tell us exactly what that BSOD says before anyone can try to suggest a fix for the problem.

Ron

Message Edited by RoHe on 08-30-2005 10:25 AM

this is what was on my BSOD:

 

STOP   0x000000D1(0x00000060, 0x00000000, 0xEEEDB7C2

USB200M. sys-address EEEDB7C2  base at EEEDB000, DATE STAMP3d2bdcda

I edited my last post so read it again.

Ron

Thanks for the info..I will try your suggestion  :smileyhappy:

Not much of a solution here, but it seems to be a known error:
http://support.microsoft.com/default.aspx?scid=kb;en-us;902973

If you use USB keyboard or mouse, you may have to borrow a PS/2 version to do this. Disconnect the Linksys from the system. Then go into Device Manager. Expand the list under USB, right click each item, one at a time, and select uninstall. Go down the list until they're all gone. Exit Device Manager, reboot and let XP reinstall the ports. After the ports are reinstalled, and before connecting anything to USB, right click each USB root hub in Device Manager, select Properties and then Power Management tab. Uncheck box "Allow PC to turn off this device..."

Maybe try a USB port on the back of the tower if you have one, too.

Ron

Message Edited by RoHe on 08-30-2005 07:40 PM

Maybe your DSL modem software provides for USB 2.0 connectivity. Mine did. My DSL modem was a WESTELL which when hooked up to the USB on the back of the modem and loaded the USB 2.0 connectivity off the software disk it worked great. However you must have USB