I would check Brocade's website directly. Last time I was digging around there they had lots of customer provided tools and scripts and I suspect there are more than a few related to migration from Cisco hardware. In the end I guess it depends on what you are really looking for. How well do you understand both environments to be able to match the new to the old (of course without limiting yourself on capabilities with the new)

Hi,

Initially, I wanted to find an automatic solution, but I decided to manually configure the new dcx.

I need to obtain input for creating effective zone configuration, but I am not familiar with Cisco SAN OS.

I'd like to use the same aliases, which I gathered with show fcalias command.

Then I tried to execute "show zoneset active" on MDS, but the result is not satisfactory:

The output is based on pwwn:

zoneset name zoneset_xxx vsan y

  zone name xx

  list of pwwn

Do You know if there is an equivalent for FOS commands: cfgshow and zoneshow for MDS ?

I dont now how to gather zones definitions described with aliases.

I think its because aliases were created as fcaliases and not as device aliases so you see the wwn and not the alias name. You will need to dump all fcaliases , massage that data and then use that with createali commands on brocade.

online or offline migration ?

how about online migration of zones from CISCO MDS 9500 to Brocade 8510-8 ?