UNSOLVED

flygirl77

updated

21 years ago

F

flygirl77

9 Posts

0

5754

February 20th, 2006 15:00

Installing 3rd Sata HD?

Hi All
 
I have a XPS Gen2 and want to install a 3rd Sata HD, the kind installed in its own front bay, so I can take it out at will.  I have the serial ATA PCI card to connect it to, but I have two questions.  First, where do I plug the little LED signal connector to.  I see several places to possibly plug it in on the mother board, but not sure.  Second, I want to put another windows XP pro on this HD, will windows automatically have me choose like in a dual boot system or what when this drive is plugged in?  Thanks all for assistance.
 
Flygirl
  • Sparky1641

    37 Posts

    442

    0

    Posted February 20th, 2006 16:00

    You mention a 3rd drive. Do you have a RAID configuration right now with the first two drives? You can set the boot order in BIOS.
  • Sparky1641

    37 Posts

    442

    0

    Posted February 20th, 2006 16:00

    I believe the LED signal is part of the ATA cable, so you don't need to use the connector. Also, check your Dell owners manual on RAID configuations. It talks about the limitations of using a 3rd HDD. 
  • flygirl77

    9 Posts

    442

    0

    Posted February 20th, 2006 16:00

    I do not have RAID set now.  I want RAID 0, all separete HDs as such.  Where do I plug that other connector to on the mother board?

    Flygirl

  • flygirl77

    9 Posts

    442

    0

    Posted February 20th, 2006 19:00

    I cannot find anything saying I cannot install 3rd HD.  I would have RAID off so that should not be a problem, I think.  I guess I need to know is there a better way to connect the third HD besides what I plan through the PCI card and will there be any other problems that I should anticipate?  I have only two Sata connections on the motherboard.

    Thanks

    Flygirl

    Message Edited by flygirl77 on 02-20-2006 03:12 PM

  • flygirl77

    9 Posts

    442

    0

    Posted February 20th, 2006 20:00

    I already have an external HD.  You see a friend of mine has a beta of Vista and I would like to run it but not disregarding my primary system.  That is why the set up that way.

    Flygirl

  • Sparky1641

    37 Posts

    442

    0

    Posted February 20th, 2006 20:00

    Since you're not currently using RAID now, adding a third drive is no problem. I know on the XPS Gen 3 using the Intel RAID controller you can only configure paired drives 2, 4, etc. for RAID. You can add a third drive, but only in a RAID 1 configuration AND the third drive will NOT be recognized by the OS, but you will be able to see the spare drive from within Disk Manager or the Intel Option ROM utility.
    Since you want the third drive to be somewhat portable, why not use an external USB hard drive such as Maxtor one touch? Since it's USB, you will have no problems down the line if you decide to upgrade to RAID.
  • 442

    0

    Posted February 21st, 2006 19:00

    I have a new XPS400 with RAID1 and have installed an independent SATA 3rd drive successfully.
  • Sparky1641

    37 Posts

    442

    0

    Posted February 21st, 2006 23:00

    Does the OS see the third drive? Are you using the Intel RAID controller? Maybe Dell made a change on the XPS400. The Gen 3 manual specifically says the OS will NOT see a third drive - page 24 "Creating a spare hard drive".
  • 442

    0

    Posted February 22nd, 2006 02:00

    Yes and yes. The 3rd drive had to be enabled in the bios in slot t, but XP saw it upon bootup. I did change the drive letter but that's all.

    The boot array now shows 1 array, 2 RAID devices and a non-RAID device.

    My warning is to NOT listen to Dell tech support tell you how to do this. I have learned over the last few days that the Del support people - even the XPS support team, are relatively clueless about RAID1.
  • ernieO

    30 Posts

    71

    0

    Posted March 3rd, 2006 14:00

    The Dell Techs I spoke about RAID are totally clueless.  Without this forum many of us would be in deep trouble