UNSOLVED
F
ffdfdfdfdfdfd
1 Rookie
•
16 Posts
0
180
February 6th, 2024 17:36
iDrac9 local root account not working after enabling directory services.
Currently on iDRAC9 firmware 7.00.60.00.
Local root account stops working once I enable and configure LDAP directory services.
Prior versions did not have this behavior. How do I get my local root working again?
Edit: This was working as of 7.00.30.00.
(edited)
DELL-Charles R
Moderator
•
4730 Posts
•
25476 Points
0
0
Posted February 6th, 2024 21:45
Hello,
You may try a flea power drain first:
drain flea power (shut down, disconnect power cables and Network cables, hold in power button 20 seconds with cords removed). After flea power drain, system has to set for 3 minutes for DRAC to reset without any power plugged in, then plug in NIC and power but wait 2 minutes before power on to give DRAC time to initialize.
Check results
If that doesn't work the use the steps below to run racadm racresetcfg.
This would reset the DRAC to defaults and then reconfigure the DRAC.
Install DRAC tools. This link is for Dell iDRAC Tools for Microsoft Windows Server®, v11.1.0.0:
https://dell.to/499JcOr
If you have different OS you can find it on the support page for your server
https://dell.to/494WHyY
From the host OS you can use racadm racresetcfg
Then reconfigure your DRAC settings.
How to configure the Integrated Dell Remote Access Controller 9 (iDRAC9) with Lifecycle Controller network settings
https://dell.to/3SM9YXt
DELL-Charles R
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!