UNSOLVED
1600n intermittent jam
Intermittently, I get [Paper Jam 0] Open/Close Door error when trying to print. When it happens, sometimes just opeing and closing the door does the trick. Other times, it just keeps happening until the door is pen and closed many, many times. Once it starts to work, a 50 page document will print with no further errors. Other times, it will happen on every page. I've tried looking at the "S" piece after opening the back, and that is not the problem. Anyone have a fix?
BdSki
1 Message
238
0
Posted March 12th, 2010 17:00
I have the same problem (no jam found), but opening and closing the door is starting to work less and less (it may help to next print one or more pages but then it stops again). Also, sometimes the error message says no toner or 0% toner, in which event I remove ther cartridge, shake it and reinsert -- this seems to work (so far). The only other cluse I have is that on the inside front top of the paper tray there is a small silver metal clip, which is loose and sometimes comes off resulting on the same paper jam error message. Re-inserting the clip generally solves that part of the problem. I wonder if any of this enables you or someone else to shed light on the silver clip (contact point? sensor?) or the larger rpblem we share in printing. Thanks.