UNSOLVED

smadavid

updated

21 years ago

S

smadavid

6 Posts

0

14879

June 21st, 2005 19:00

PERC4ei Specificatinos

Where can I find the specifications for the various PERC controllers available on the 2850?  I can't seem to find anything on the Dell site.  Specifically, I'm wondinering if the PERC4ei is dual-channel.  I'm considering using this for a SQL server, with a RAID 1 array on the first channel (for boot & transaction logs), and RAID 5 w/4 drives on the second channel (for data).  But I want to make sure the controller is dual-channel, or do I need to step up to the PERC4DC?  Thanks for any help :-)
  • smadavid

    6 Posts

    248

    0

    Posted June 21st, 2005 20:00

    Thanks for the info!  The specific model I'm looking at (the PERC4ei -- on the 2850 rack-mount server) was not mentioned in those docs... most models contain an 'S' for single-channel, and a 'D' for dual-channel, but the 'ei' doesn't seem to indicate anything other than that it is embedded.  Are the two channels both channels internal?  Because that second bit of info seems to indicate otherwise when it mentiones 'the internal channel'.  I'd like to use one channel for the media bay and one for the backplane.  If it can do this, then I'm all set.  Thanks again for the help!
  • warwizard55

    720 Posts

    248

    0

    Posted June 21st, 2005 20:00

    smadavid,

    "The DellTM PowerEdgeTM Expandable RAID Controller (PERC) 4/Di/Si and 4e/Di/Si are embedded subsystems on the motherboard that offer RAID control capabilities. The RAID controller supports all low-voltage differential (LVD) SCSI devices on Ultra320 and Wide SCSI channels with data transfer rates up to 320 MB/sec. PERC 4/Si and 4e/Si support a single channel, while PERC 4/Di and 4e/Di support two channels."

    http://support.dell.com/support/edocs/systems/pe2800/

     

    • An integrated, dual-channel U320 SCSI host adapter. The internal channel supports up to ten SCSI hard drives using the 1x8 and 1x2 SCSI backplanes. The SCSI backplane automatically configures SCSI ID numbers and SCSI termination, greatly simplifying drive installation.

    • Optional ROMB activated by using a ROMB key, a 256-MB DDR2 400 memory module, and a RAID battery.

      The PE2800 uses the PERC 4e/DI controller...

      warwizard DCSP

    • warwizard55

      720 Posts

      248

      0

      Posted June 21st, 2005 21:00

      So the internal BP when split, will not support your need for a 4 drive RAID 5.
    • warwizard55

      720 Posts

      248

      0

      Posted June 21st, 2005 21:00

      Oops!,  I posted the links to the PE2800. The 2850 has the 4e/Di

      "Support for up to six 1-inch, internal U320 SCSI hard drives (with hot-plug capability when using the optional RAID capability). An optional daughter card provides support for a split backplane."

      Makes for a 2x3 BP configuration.

      http://support.dell.com/support/edocs/systems/pe2850/

      warwizard

    • smadavid

      6 Posts

      248

      0

      Posted June 22nd, 2005 17:00

      Thanks again.  So, can you confirm that the PERC4ei is two internal channels, as opposed to one internal and one external?
    • smadavid

      6 Posts

      248

      0

      Posted June 22nd, 2005 20:00

      That answers everything -- thanks again for your help.  Would be nice if they listed the info right on the order page like they do for the PERC4/DC -- "2 Internal Channels, 0 External Channels".  Maybe you could pass that suggestion along.  I'm off to place my order...
    • warwizard55

      720 Posts

      248

      0

      Posted June 22nd, 2005 20:00

      Connectors 

      Externally accessible

      Back

      NIC                                            Two RJ-45 (for integrated 1-Gigabit NICs)

      PS/2-style keyboard                  6-pin mini-DIN

      PS/2-compatible mouse           6-pin mini-DIN

      Serial                                         9-pin, DTE, 16550-compatible

      USB                                          Two 4-pin, USB 2.0 compliant

      Video                                         15-pin VGA

      -----------------------------------------------------------------------------------

      Front

      Video                                         15-pin VGA

      USB                                           Two 4-pin, USB 2.0 compliant

      ------------------------------------------------------------------------------------

      Internally accessible

      SCSI channels                            Two 68-pin U320 SCSI

      -----------------------------------------------------------------------------------
      No External SCSI connector for the embedded SCSI/RAID, 2 internal.
       
      warwizard DCSP