UNSOLVED
E
ethaniel86
16 Posts
0
6388
March 4th, 2015 04:00
R710 with 9 x 2GB ram
Hi
I have 9 x 2GB memory how do i put in each slot? My server with dual processor.
My current config is
CPU 1 : A1, A4, A2, A5, A3
CPU 2 : B1, B4, B2, B5
When i start up BIOS shows one slot is disabled though. Read owner's manual but still not clear.
Thanks
macjiperry
5 Posts
682
1
Posted March 4th, 2015 08:00
Some of the new systems are a little finicky when it comes to RAM allocation for the CPUs. Do as the other post suggests. Either add an additional DIMM or take one of them out.
Also, make sure that all of the RAM is either buffered or unbuffered.
ethaniel86
16 Posts
682
0
Posted March 6th, 2015 10:00
okay so the sequence is correct?
I have another R710 with 4x8GB dual processor but still have not figure out how dimm works though.
i filled dimm A1,A4,B1,B4 bios prompting B1,B4 both disabled. Not sure why?
Appreciate the help.
ethaniel86
16 Posts
682
0
Posted March 6th, 2015 11:00
saw this thread last post mem config table http://en.community.dell.com/support-forums/servers/f/956/t/19581999
I should fill dimms A1,A4,B1,B4 instead?
jorisboth
6 Posts
682
1
Posted March 4th, 2015 06:00
The memory on each CPU should be equal. So either buy one memory strip more or remove one.