Hello!

The Temperature OID's are not present for the current 62xx firmware (2.2.0.3), but will be included in the next set of firmware and MIB revisions, dubbed 3.0 due to come out by the end of June.  Included is a new MIB called FASTPATH-BOXSERVICES-PRIVATE-MIB which will contain the OID .1.3.6.1.4.1.674.10895.5000.2..6132.1.1.43.1.8.1.4 for the temperature sensor reading.

I'm not able to locate CPU utilization and am looking further into the issue.  If not present, I'll request the addition for the next MIB release.

Victor

Hi Victor,

Thank you for your prompt and concise response.

If you can get back to me regarding the CPU OID's that would be great.

Regards

Russell

The CPU Utilization OIDs for 62xx switches are

1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1   (total free memory)

1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2   (total memory)

1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3   (Table for the following...)

1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.1   (Index)

1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2   (Name of process using CPU)

1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2   (% of  CPU used by corresponding process)

Victor

PowerConnect 62xx rollup CPU is .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.4.0 ...

i.e.  # snmpwalk -v 2c -c xxxxx  192.168.1.1  .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.4.0

SNMPv2-SMI::enterprises.674.10895.5000.2.6132.1.1.1.1.4.4.0 = STRING: "5 Sec (19.68%),    1 Min (22.20%),   5 Min (21.82%)"