UNSOLVED

bagheri

updated

19 years ago

B

bagheri

27 Posts

0

702

March 5th, 2008 00:00

Windows 2003 SP2 Upgrade & NW Client problem

I upgraded SP2 on Windows 2003 and the Client backup speed degraded to 400KB/s, I don't see any problems. NW 7.3.2 on Solaris is used. please advise
  • fjsacristan

    159 Posts

    259

    0

    Posted March 5th, 2008 06:00

    Hi Bagheri,

    - Stop NetWorker Services, look for if there ir any daemon nsr*, rename /nsr/tmp and start NetWorker Services on client Windows.

    - Is the card ethernet forced on machine Windows?

    - Have you done proof FTP between Backup Server and Client and viceversa? In this way, you could reject problems with network.

    Regards.

    Inma Bernabe.
  • bagheri

    27 Posts

    259

    0

    Posted April 5th, 2008 01:00

    I tried the solution, but the problem still exists, I also reinstalled the client but nothing changed. what other solutions can I try?
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    259

    0

    Posted April 5th, 2008 21:00

    What is the ftp results? Try both put and get from client/server.
  • IKP1

    198 Posts

    259

    0

    Posted April 7th, 2008 09:00

    Hi,

    As suggested, have you tried using ftp to upload and download large(ish) files between the two systems?

    Also worth taking a look at the drivers for the LAN cards - have these changed with the installation of SP2 ?

    Are there manufacturer supplied drivers which are supported with SP2 as these normally are better / quicker than more generic Microsoft supplied drivers ?

    IKP
  • bagheri

    27 Posts

    259

    0

    Posted April 10th, 2008 03:00

    There is no network issue at all, because the server is performing its service as usuall, only backup is so slow.
  • fjsacristan

    159 Posts

    259

    0

    Posted April 10th, 2008 07:00

    Hi,

    If backup are slow is because could there are problems with the communications.

    Have you tryed FTP between Backup Server and client and viceversa?

    Have you tryed backup during day, on the morning, for example, for other time? What is the result? The speed changes?

    If NetWorker works fine, I think the problem are communications between Client and Backup Server.

    Regards.

    Inma Bernabe.