
UNSOLVED
Studio 1557 randomly shuts down
Hey guys,
I got a Studio 1557 with i7 core. I bought it in February 2010.
I got shut down problems from the beginning but it was really rare so I didn't care, but now it appears more often and can't figure out what to do against them. Here is my story.
When I do different stuff on the notebook, it simply wents completely off. No bluescreen, nothing. It's like I would remove the battery and unplug it. But often I don't even touch it and it happens, so it's probably not a loose contact. I got the newest drivers from dell, the new BIOS, tried different ATI graphic card drivers, no help. I ran the Dell PSA tool, no problems found. I also ran a cascade of "Clean my System" etc. tool, no problems. I finally reinstalled windows, what a pain - didn't help!
The shut downs happened while I was doing different stuff. Playing WoW, downloading a Software Image from the university over night (So the notebook was off and the download not completed when I woke up), when I did calculations with MatLab over night and once I was watching a youtube video.
Next strange fact: When the notebook shuts down, I can switch it immediately on again, but when Windows starts booting I get bluescreens and windows is saving the image etc. When I wait for 5-10min, everything is fine again.
So I thought the notebook may overheat, since it seems to be hot, too. So I downloaded a "Burn my CPU" tool. SpeedFan gives my 80-90°C CPU temperature, but the notebook does not crash. I also tried a "Burn my graphic card" tool, also didn't crash.
The Windows Log gives me the Error ID 41, for shutting down or energy loss and it does not really know what happens.
In the Windows energy management I also set, that the CPU only uses 70% of its capacity - also didn't help.
So I'm out of ideas. I found a similar post about the 1557 in the forums, but there weren't useful answer.
I would be thankful if anybody has nice ideas. At the moment I would love to get rid of the notebook and buy another one. :-(
Thanks so much
Michael
Responses (2)
Solutions (0)
Hey Brooks,
thanks for your reply.I was also really angry at Dell. But then one Dell technician came to my house and fixed the problem. In my case, it was really a heat problem. So she replaced the whole cooling section and now everything is fine. :-)So a bad start, but the support was really fast and fixed the problem.Michael

22524
2 Posts
247
0
Posted February 23rd, 2011 13:00
Michael,
My wife's laptop suffered from the same problem. Like you, I thought it was heat related until I noticed something very uncool (PUN!!!): I could get her laptop to shutdown with a nice little physical bump, when you just set it down on a table, or just moved it!
Dell decided it was a nice idea to replace the motherboard :emotion-3: since it most certainly had to be heat related (wrong!). The technician, while plugging the power switch back into the motherboard, found the problem. Here we go:
The wires from the power button are inserted into a plastic plug using little copper sheathes. The copper sheaths are crimped around the exposed wire ends, and the sheaths are glued into the plug. Well the "master crimpper" at Dell must have been having a bad day because he/she apparently didn't do it right, and the wires would just slide out of the sheaths. Thus, a bump, power off, things get hot and the sheaths expand, and the power goes off. Great!!!
So trying giving the laptop a little bump after it's run a little while. Or just pick it up, and then set it back down. If the power goes off, there ya go.
By the way, I'm ready to hurl that little sucker in a lake!!! One year of ownership and the only original equipment is the keyboard, screen, hard drive, and case. Everything else has been replaced and my Centrino 2 can still smoke it! GRRR!!!!!
Let me know what you find out.
Brooks