UNSOLVED

darrin99

updated

12 years ago

D

darrin99

520 Posts

0

36933

July 24th, 2014 21:00

XPS 8700 New Bios A08?

Anyone have an opinion on the the 8700's new A08 Bios? It appears to be a fix for some USB 3.0 issues. Before I install it, anyone know if it introduces any new issues, and if they notice any improvements? 

  • ispalten

    7 Practitioner

    •

    2652 Posts

    •

    9776 Points

    907

    1

    Posted July 25th, 2014 18:00

    I installed when first out. Seemed to fix a few problems with USB, both 2.0 and 3.0. However LOOK at all the files that have the SAME release date as well. Date is 6/24/2014 and if you look at all the files you'll see some with that date or near it. Some show it as the release date but version A00, the same as the prior one. The FoxConn one in particular I needed as well to fix the media card reader...


    Dell did a poor job updating the D/L data, version were not changed and the changes were not well documented if at all IMHO.

    I don't recall any 'improvements', but I didn't see any regressions either from A06.

  • ispalten

    7 Practitioner

    •

    2652 Posts

    •

    9776 Points

    907

    0

    Posted August 17th, 2014 16:00

    I just saw the BIOS A08 version available on the Dell website, but I'm afraid to update, as my machine is on version A00.  Dell specifically recommends updating BIOS by jumps of only 2-3 versions at a time. The "previous versions" link is empty. I'd like some enhancements for my USB 3.0 ports (they're about the same speed as the 2.0), but a single jump of 8 BIOS versions seems fraught with hazards. 

    I don't think Dell released many Flashed. 03, 06, and the 08.

    My machine came with the 06 and that one from the forums seemed to have problems, especially with an SSD which I installed, but I didn't see the problem. USB ports were problematic for me. Going to A08 fixed the USB ports and I saw other stuff work better.

    I'd give it a try.

    Oh, and the FoxConn Icon Manager driver says "Last Updated 6/23/14," but is the EXACT SAME driver file I downloaded and installed on 8/27/13, which did fix some of the card-reader problems...

    There are a LOT of files that say they are A00 but updated around the same time as the BIOS was released. I have NOT been able to get any details on that. My posts asking for that go unanswered.

    For instance:

    ========

    Intel Z87 Chipset Driver

    This package provides Intel Z87 Chipset Driver and is supported on XPS 8700 running the following Windows Operating systems: Windows 7 and Windows 8.

    Version

    Version 9.4.0.1016, A00

    Compatibility

    Systems
    • XPS 8700 (Mid 2013)
    Operating Systems
    • MS Windows 7 64-bit
    • MS Windows 8 64-bit

    Applies to

    Intel Chipset Software Installation Utility

    Date

    Release date
    11/20/2013
    Last Updated
    6/23/2014

    Importance

    Recommended. Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).
    ====================
    A00 file but isn't the Initial release and says it is updated? Huh?
    Some files, such as the "Intel AMT HECI Driver" doesn't install that at all but an Intel FW tool? No answer on that either.

    Other d/l's you'll have upped the A0x number for updated files, like:
    ============
    Dell Update Application View details
    DellUpdate.1.0.1059_ZPE.exe | Hard-Drive (665 KB)
    Application |
    Release date 6/2/2014
    | Last Updated 8/13/2014
    | Recommended
    Version 1.0.1059.0,A03
    =============
     
    Somebody needs to fix the d/l info for sure.

  • MrNews

    8 Posts

    907

    0

    Posted August 17th, 2014 16:00

    I just saw the BIOS A08 version available on the Dell website, but I'm afraid to update, as my machine is on version A00.  Dell specifically recommends updating BIOS by jumps of only 2-3 versions at a time. The "previous versions" link is empty. I'd like some enhancements for my USB 3.0 ports (they're about the same speed as the 2.0), but a single jump of 8 BIOS versions seems fraught with hazards. 

    Oh, and the FoxConn Icon Manager driver says "Last Updated 6/23/14," but is the EXACT SAME driver file I downloaded and installed on 8/27/13, which did fix some of the card-reader problems...

  • MrNews

    8 Posts

    907

    0

    Posted August 18th, 2014 06:00

    I think I'll apply the "don't fix it if it ain't broke" rule. To flash the BIOS with the hope of getting better USB 3.0 performance, but the very real risk of totally screwing up the machine, just ain't worth it. Ocassionally, these posted updates fix something but, in my experience, they are best installed within a few months of buying the machine. A year or two (and an OS update) later, the risk of a system meltdown is much higher.

    Also, with BIOS A08, the Dell downloads page does not show any earlier versions available. So, it's not (apparently) possible to do a step-by-step installation.  Feh!!

  • ispalten

    7 Practitioner

    •

    2652 Posts

    •

    9776 Points

    907

    0

    Posted August 18th, 2014 09:00

    I think I'll apply the "don't fix it if it ain't broke" rule. To flash the BIOS with the hope of getting better USB 3.0 performance, but the very real risk of totally screwing up the machine, just ain't worth it. Ocassionally, these posted updates fix something but, in my experience, they are best installed within a few months of buying the machine. A year or two (and an OS update) later, the risk of a system meltdown is much higher.

    Also, with BIOS A08, the Dell downloads page does not show any earlier versions available. So, it's not (apparently) possible to do a step-by-step installation.  Feh!!

    Yeah, before the A06 was listed as a prior release available.

    Normally I'd agree with you on the adage of "don't fix it if it ain't broke" but I had SERIOUS problems with USB 2.0 on the A06 BIOS. One could not 'safely remove h/w" on USB 2.0 Devices on either USB 2.0 or 3.0 front ports. A08 fixed that.

    A word of caution on some of the files. In looking at the d/l's I noticed the Dell Update was new. Good, I got it and tried to install it. It said I had a newer version that had to be uninstalled first? Huh? So I did that. Tried again and got the same message. Looked in the registry and found a lot of references to Dell Update (include a hex version number) as the Service was still enabled (although the file was gone). Rather than try the registry removals I called into support. They got on my computer and determined I had a problem AND I did nothing wrong. Tech did remove stuff from the registry and we were able to then install the update. Not sure what was wrong there. He also ran the scanning program for updates. Found 3, the chipset, AMT, and network driver, which I had already installed. He installed them and then ran the update check and got the same 3 again... he was confused also. 'We' gave up at that time.

    Dell's d/l's are seriously lacking in documentation and quality control to make sure the right files are there, properly documented, and working.

    Beware.

  • DELL-Jay W

    10 Posts

    907

    0

    Posted August 26th, 2014 12:00

    A direct jump from a stable A00 to A08 build should be fine. If there were problems with the latest build, they'd be reported and known by now.

    "Last Updated" just means we had to change details about the driver, but the driver file is still the exact same as it was on the release date. This is ALWAYS going to be true. If a posted driver proves to be corrupt and/or unstable, the updated driver will always gain a new Release Date, if not a new Rev ID, to indicate it is a different build/posting of the file.

    Last Updated just means we had to change some wording, or detail about the driver.

  • MrNews

    8 Posts

    907

    0

    Posted August 26th, 2014 15:00

    My honest opinion. Don't upgrade. I did so last year about 3 months after buying my XPS8700 and regretted it the moment after. Since I do not have any issues with the USB on mine and they work as advertised I really don't recommend this.

    This would be my inclination. Several IT pros have told me never update the BIOS unless a)you have a serious problem, AND b)the BIOS update directly addresses it.     That said, my 8700 does have VERY slow USB 3.0 write speeds across a range of thumb drives. Probably a built-in flaw from Dell, but not a deal-killer, and I don't fancy potentially f-ing up my entire machine to find out...

  • wowsers55

    84 Posts

    907

    0

    Posted August 26th, 2014 15:00

    My honest opinion. Don't upgrade. I did so last year about 3 months after buying my XPS8700 and regretted it the moment after. Since I do not have any issues with the USB on mine and they work as advertised I really don't recommend this.

    My machine came with A03 installed and it would boot very fast (6.5 seconds) until I saw the Dell logo but with A06 it took something like 30 seconds and almost 1 minute until I could use the PC. I finally found a way to revert back to A03 and my machine is finally just like the day I bought it...meaning it boot very fast.

    A08 might have fixed something about USB 3.0 but I don't see any problem with mine and i'm not ready to install this Bios and see my machine crawling when I boot it. So the answer is a big fat NO.

  • wowsers55

    84 Posts

    907

    0

    Posted August 26th, 2014 16:00

    This is a wise decision on your part. My XPS8700SE work as great as the first day I got it. I am really impressed with it's performance as I use it mostly for gaming. Zero issues except for when I upgraded to A06 but I finally could revert back to A03. Out of curiosity, what Bios are you running on right now?

  • MrNews

    8 Posts

    228

    0

    Posted August 26th, 2014 17:00

    Out of curiosity, what Bios are you running on right now?

    I am still running A00. Bought this machine via Costco 13 months ago. Only updates have been the Dell one that allows the card reader to work correctly (had same problem with my previous Dell), and upgrade to Win 8.1. Mainly use it for photo & web editing, surfing, and correspondence. Very reluctant to mess with drivers etc while everything is working.