UNSOLVED

runner3735

updated

18 years ago

R

runner3735

16 Posts

0

97917

April 10th, 2009 19:00

Will OptiPlex 745 Support 45nm Wolfdale CPU?

My OptiPlex 745 currently has a Core 2 Duo E6300.  I would like to upgrade the processor, and am looking for a good bang-for-the-buck solution.  The E5200 2.5 GHz Dual Core is quite reasonable, in fact I can probably sell the E6300 on Ebay for more than a new E5200 would cost.  But will it work?

Second question - is there any danger in trying?  I have put incompatible processors in motherboards before, and it did not cause any damage to either processor or board...just making sure that there is not a danger in this case.

  • toaster045

    1 Rookie

    •

    81 Posts

    2100

    0

    Posted April 11th, 2009 15:00

    This is really spooky I have a Optiplex 745 and was thinking the exact same thing :O

    So any replies would also be really helpful. But browsing around I found this and I'm not too sure if the newer 45 nm would work. 

    Also would there be much of a performance increase i thought of the e5200 due to as you say bang for buck.

    Since reading that document i've started thinking that the top processor in a Optiplex 745 would be a E6700 as it's 65nm, got the same 4mb L2 cache and 1066mhz fsb. (i've been using this to compare intel processors) but then again the "bang for buck" might not be so great.

     

    Toby

  • mjschug

    4 Posts

    2100

    0

    Posted May 8th, 2009 08:00

    Not sure if this thread is still active, but I just tried to upgrade my Optiplex 745 Mini Tower.  With no luck.

    I puchased a Intel Core2Duo E7500 since the 745 chipset does support the chip and this CPU is a 1066fsb so I figured it would work.  Well turns out the dell motherboard said no! Even with the latest bios update of 2.6.2.


    I guess they are not as upgrade friendly as you would think.  I tried to work with Dell Tech Support Chat and they were absolutely no help.  She kept going on about my video card.

    Matt

  • divmediat

    2 Posts

    2100

    0

    Posted May 14th, 2009 00:00

    I just tried to upgrade my Optiplex 210L with an Intel E5200 CPU, that did not work. The front led just went orange, so I changed back to my old CPU and it worked fine, as you say, it's usually no danger trying.

    But it would be nice if dell could add support for the E5200 CPU since it's really cheap nowadays.

    regards,

  • bejam

    4 Posts

    2100

    0

    Posted May 25th, 2009 05:00

    I have just bought an optiplex 745 barebones and the E5200 CPU to go in it. I assumes it would work but I just got the orange LCD on the MB. Guess I should have searched around a bit before buying the CPU. What is the fastest CPU that this MB can take?

  • datahog

    64 Posts

    2100

    0

    Posted March 17th, 2010 20:00

    :emotion-1:max cpu is e6700...may be a q6700