UNSOLVED

Alidandy

updated

21 years ago

A

Alidandy

3 Posts

0

14069

July 6th, 2005 21:00

Nvidia FX5500 in a WS670

Hello
 
Can anyone tell me if the GeForce FX 5500 Card should work in the Precision WS 670 unit?
I have bought one and the screen will not come on but there is no errors showing on the unit....? I currently have only a Analogue VGA cable but that shouldn't matter?
I also read something about clearing the NVRAM but that seems almost impossible considering you need to see the screen to perform the key strokes at the correct time....
 
Any information will be much appreciated.
 
Ali
  • speedstep

    11 Legend

    •

    46969 Posts

    211

    0

    Posted July 8th, 2005 02:00

    If its a card from PNY it should work. However there are lots of junk vendors that sell 5500 supposed cards and they are Garbage right out of the box.

    Usually a pink box with no branding on it or a white box.

    I got 2 like this that were DOA out of the box before I gave up and bought retail PNY cards.
  • Alidandy

    3 Posts

    211

    0

    Posted July 9th, 2005 07:00

    Hi

     

    Its an Tornado GeForce FX 5500 made by inno3D?
    It runs at 4X/8X slot and has 256Mb memory.....

    I suppose what I am really asking is confirmation that the WS670 supports 4X/8x AGP?
    If yes then I know the card is faulty, if yes then I messed up and need to buy a compatible APG card I suppose...?

    Ali

  • speedstep

    11 Legend

    •

    46969 Posts

    211

    0

    Posted July 10th, 2005 19:00


    @Alidandy wrote:

    Hi     Its an Tornado GeForce FX 5500 made by inno3D?
    It runs at 4X/8X slot and has 256Mb memory.....

    I suppose what I am really asking is confirmation that the WS670 supports 4X/8x AGP?
    If yes then I know the card is faulty, if yes then I messed up and need to buy a compatible APG card I suppose...?

    Ali


    http://www.newegg.com/Product/Product.asp?Item=N82E16814170071&CMP=OTC-Sm4rterDe4ls&ATT=Video+Cards

    http://support.ap.dell.com/docs/systems/ws670/en/

    http://support.ap.dell.com/docs/systems/ws670/en/UG/index.htm

    http://support.ap.dell.com/docs/systems/ws670/en/UG/about.htm#1053318

    Computer Information
    Chipset  Intel E7525
    Video Type  PCI Express x16 150 W

    You should be using a PCI -X video card not the OLD AGP/PCI Geforce FX5500.

    NVIDIA GeForce FX6600 128MB 128bit DDR, PCI-Express interface

    Dell Precision 670 computer
     
    PCI connector  one connector size  120 pins connector data width (maximum)  32 bits
     
    PCIX connectors  three connector size  188 pins connector data width (maximum)  64 bits
     
    PCI Express x16 connector  one connector size  164 pins connector data width (maximum)
     16 bits
     
    PCI Express x8 (runs at x4 only) connector  one connector size  98 pins connector data width (maximum)
     4 bits 

    Message Edited by SpeedStep on 07-10-2005 04:21 PM

  • Alidandy

    3 Posts

    211

    0

    Posted July 11th, 2005 17:00

    Hello

    Thanks very much for the information.

    So in a polite way you are say that the card is useless as it is not a supported connection type! I stuffed it in another Pc and it fired straight up so the card is definately ok, will try to palm it off on the owner ;) and get the correct card next time.

    Thanks

    Ali

  • ABYSS1

    4 Posts

    211

    0

    Posted August 19th, 2005 15:00

    Greetings:

    This is my second post. I don't know if I'm doing this correctly but here goes. I have a WS670 with a PNY FX3400 video card. I'm trying to install a second video card to run a three dell 19" LCD configuration. The problem I'm running into is the FX3400 takes up two card slots and eliminates the only PCI connector on the board. I suppose this is give it more room for cooling. In the post above you state, if I understand it right, that the PCIX connector or the PCI Express x8 (runs at x4 only) connector could be used for a video card.

    I have gone to Dell support twice on this issue and the second time I was told they can't be used and I'm S.O.L. If they can be used would you have any idea what card is compatible?

    Thank You

    Computer Challenged Abyss1

  • speedstep

    11 Legend

    •

    46969 Posts

    211

    0

    Posted September 8th, 2005 23:00

    You CANNOT just install and install and install as many cards as you want and it works.
    This is NOT A dell issue. Its a card choice issue. If you need to support 3 or 4 monitors then you need to choose a card that supports that.