
UNSOLVED
how to configure insperion 560 for raid 1
Well dell has big ones... They want to charge me $250 to tell me what I need to change in the bios to enable the intel ich10r sata to be able to do raid. The machine cost under $600...
Currently the bios is set fo aich. I have 2 identical drives and have tried both ctrl+i and ctrl+r on boot.
What do I need to set in the bios so I can do this ?
thanks
Responses (5)
Solutions (0)
I was thiking that too but found the following document that made it appear the RAID 0 and 1 was supported. Sort of supprised that they had support for a system that starts at abot $300.00. The document link is for a 560S so may be does not apply to a 560.
See the following link:
support.dell.com/support/edocs/systems/insp560st/en/cs/cs_en.pdf
Dell 560 only has software RAID, available in Windows 7 Ultimate (my computer runs it) and maybe available in other OS too I do not know.
Software RAID is not performance oriented :(
I use W.D WD1003FBYX RE-4 1TB drives for storage and back-up. For RAID you have to use special hard drives designed for RAID application. Software RAID is too slow for anything else. Hope it help you.

TomXPS
1310 Posts
1032
0
Posted February 16th, 2011 17:00
Do you drives enabled in the BIOS? On my XPS Studio 9100 they were set up for Auto Detect by default. On my experence with the XPS Gen 2 and XPS 410 and the XPX 9100 I just received that the CTL I will be displayed once you install a second drive in the system. I think there may be some option in the Regular BIOS to set up RAID also for the SATA drives.
Assuming your system was initally setup with RAID Driver (Pre-OS) you could migrate your system to RAID 1 using the existing drive as the source and a new drive to join the array. The Intel Matric Storage manager is used to migrate on my XPS Gen 2 and XPS 410 the program was installed. My XPS 9100 did not seem to have the Pre-OS driver installed, so I had to configure the RAID 1 in the RAID BIOS (CTL I). Doing so will cause all data to be lost on both drives.
Once you create the RAID you need to install the Pre-OS driver with Windows 7 or Vista you have an option to install more drivers shortly before you start the OS install (Booting of the OS Disk).