UNSOLVED

johnnyvnt4

updated

12 years ago

0

339991

September 3rd, 2014 11:00

AMD Radeon HD 6450 heat sink radiator failure

Is there a product recall on the small form factor AMD Radeon HD 6450 (Dell part # 6XMMP)? We are seeing quite a few fail that use the radiator heat sink. The card fails when the heat sink expands and distorts the circuit card causing a short circuit in the PCI-Express slot. Half of the failures have damaged the motherboard.

  • speedstep

    11 Legend

    •

    46969 Posts

    4153

    0

    Posted September 3rd, 2014 11:00

    This among many things is something that is counterfeited.Where is the fault?


  • 4153

    0

    Posted September 3rd, 2014 11:00

    The vapour chamber ( the red flattened heat pipe) expands and distorts the circuit card til failure occurs.

    We have had six fail this way at our KC office with more being reported around the country.

  • speedstep

    11 Legend

    •

    46969 Posts

    4153

    0

    Posted September 3rd, 2014 12:00

    That certainly looks like a manufacturing Defect. The heatsink fins look different and thicker than the ones on the unit I have.:emotion-3:

     

     

  • 4153

    0

    Posted September 3rd, 2014 13:00

    Our failed boards have a # CN - 06XMMP - 74431 - 1AN - 03C0 - A01 (BACK SIDE STICKER)

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    4153

    0

    Posted September 3rd, 2014 15:00

    There is no recall. We have been using that video card on four systems (Optiplex 390/790/990/3010) for awhile now. I cannot find any record of a systemic failure. Were all of your systems purchased on the same batch order? The serial number (CN06XMMP744311AN03C0) you provided states that the video cards were manufactured on October 23, 2011. The Optiplex 390/790/990 were released for sale in 2011. The Optiplex 3010 in 2012. All you can do is have Dell Technical Support exchange the defective video cards using each systems service tag number.


    DELL-Chris M (old account)

    #IWork4Dell

  • 4152

    0

    Posted September 3rd, 2014 17:00

    Bill, though no recall was made on the graphics card that you have referred to using in four systems has two versions I know of and Dell uses two different part numbers in the System configuration, Components list for the Service Tag # build sheet. So though they are both AMD Radeon HD 6450 1Gig Graphics cards, the version change was critical enough for AMD to assign different part numbers (CN) to them.

    Dell uses two part numbers; '6XMMP' and 'M0KV6' for the AMD Radeon HD 6450 1Gig graphics card.

    What are the 3-4 groups the date? The 5th group being the production design part version? 

    If all four systems use the same small form factor style cards then there will be some form of Engineering/Tech notice at the manufacturers (AMD/ATI) level identifying the higher then normal failure rate of this model to initiate an engineering change to the production design.

    This is the information I seek. 

    Since AMD is ISO9001 certified this eng/tech notice exists and it would be based on quality assurance feedback or warranty returns from system integrators like Dell. Even if it was a particular supplier's error in building the vapour chamber to AMD specification and it was a small batch problem, it was enough for AMD to change the version and start using cooling fans for improved product reliability. My concern is how many of the vapour chamber version (Dell part # 6XMMP) we have in the couple of thousand OP 990s' and the cost the increased failures will bring to our organization when the warranty expires.

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    4152

    0

    Posted September 5th, 2014 05:00

    6XMMP = OEM AMD Radeon HD6450, OPGA8, 1GB, Low Profile, Optiplex 390/790/990/3010
    CN = China
    0 = Filler
    6XMMP = Dell part number
    14431 = OEM factory ID (confidential)
    1AN = Date 10/23/2011
    03C0 = OEM manufacturer code (confidential)
    A01 = Revision

    M0KV6 = OEM AMD Radeon HD6450, OPGA8 v2, 1GB, Low Profile, Optiplex 390/790/990
    CN = China
    0 = Filler
    M0KV6 = Dell part number
    74431 = OEM factory ID (confidential)
    25N = 5/23/2012
    00LP = OEM manufacturer code (confidential)
    A00 = Revision

    then there will be some form of Engineering/Tech notice at the manufacturers (AMD/ATI) level identifying the higher then normal failure rate of this model to initiate an engineering change to the production design.
    * We never receive this data. Even if we did, it would be Dell and OEM confidential data.


    DELL-Chris M (old account)

    #IWork4Dell

  • dmr262

    1 Message

    4152

    0

    Posted September 24th, 2014 09:00

    We've had dozens on these (6XMMP) fail and be replaced under warranty. Now they are out of warranty and we get to buy replacements. :(

  • TorVo

    2 Posts

    4152

    1

    Posted October 14th, 2014 08:00

    I have two on the job here. Exact same symptoms, same problem. I support 80 of these systems in my work environment.

     

    CN-0K6HDT-74431-18R-01TY-A01 (If I am accurately reading the tiny characters on the sticker).

     

    Warranty expired on these systems precisely a month ago.

  • speedstep

    11 Legend

    •

    46969 Posts

    1546

    0

    Posted October 14th, 2014 09:00

    K6HDT looks totally different.