
UNSOLVED
Alienware 17 Laptop Won't Start
The laptop has had some apparent graphics card issues (flickering, lots of weird red pixels that's hard to describe, etc.). I looked for software solutions to no avail and eventually found a post that suggested reseating the graphics card. I successfully reseated the graphics card which helped slightly, but then the issues returned. The next thing I found in the forums to try was to reseat the monitor connections. However, now the laptop will not turn on. I'm fairly experienced with computer hardware, but am very much out of my depth at this point. I'm certain that I need to take my laptop to a technician who can repair it for me; I believe it may require replacement part(s).
Help!
Responses (8)
Solutions (0)
I PMed you, but in case this gets attention faster, I'll copy paste my reply here as well.
There is 0 activity on pressing the power button (with/without AC plugged in). No fan, no AlienFX. I believe the powering on issue has to do with a broken connector latch (the one which connects the keyboard daughter-card and the system board). The graphics card issues I was experiencing prior to the connector latch breaking I do not know what the problem is. The laptop is still quite new (bought it in December) and I purchased 2 or 3 years of insurance/advanced support.
I am located in the U.S.
Alienware-Naomi
6 Operator
•
1776 Posts
627
0
Posted June 24th, 2014 19:00
Thank you! I've replied to your message and will continue to follow up with you via PM.
Hi Acarias, sounds like your may have missed one of the ribbon cables.
There are two main ribbon cables that need to be checked. One is underneath the DVD player.
The other is between the palmrest assembly and the motherboard on the right hand side, it connects the motherboard to the palmrest, I suspect that this is the one causing your issues.
You will need to disassemble the laptop again to check, when you separate the palmrest from the main body be careful as this ribbon cable is held with double sided tape, and can be damaged if ripped out.
Goodluck and please mark this forum post as answered if this solution works.
Here is a guide to help you through disassembly
7leagues_4ebdf4
29 Posts
627
0
Posted January 6th, 2015 02:00
I'm having a similar problem.
I bought the machine in October 2014 an have yet to be able to use it. It has been plagued with silly little issues but 2 weeks ago a Dell tech came to replace the motherboard. After he had finished, the machine would not boot. As it was 6pm he did not want to stay and find the fault so he told me it was due to the BIOS being A08 whereas the original was A14. As the machine would not start, even in safe mode, it was not possible to flash the BIOS to the latest version (A14) so he instructed me to reinstall Windows.
Grrrrrr ...ALL my programs and 2 weeks of work lost!
Anyway, it started after reinstalling Windows but the online techs then took control of my machine in order to flash the BIOS and reinstall the drivers and again the machine would not start. 3 Dell online techs intervened and none of them could find out why. Then, I restored the system to the way it was before installing the drivers and proceeded to install them on a one-by-one basis respecting the request to reboot afer each install. This was something none of the Dell techs would do. The problem came to the surface almost instantly because first I installed the chipset driver and the machine booted normally. Then I installed the Nvidia video driver and it no longer wanted to boot.The screen display works fine but Windows log reports "A required resource was not found" thereby intimating that something is not connected.
I'm now in the situation that I need the onsite tech to return and repair his error but Dell tech support is not replying to my mails. If that's what I paid 4 years Premium support for then I'm not very impressed. I'm in France so I doubt there is anything that can be done to assist me from here.
Here is a guide to the correct driver installation order for your Alienware computer.
I suspect your referring to an Alienware 17 if you purchased it in Oct 2014.
Did you install the Intel HD graphics driver BEFORE the NVidia driver?
If you have a 3D 120Hz screen then you don't need to, if you don't have a 120Hz screen then this may be causing the error message, in any event try following the installation guide ensuring you restart your laptop after each driver has finished - No exceptions.
There is one or two small changes I recommend in the driver installation order.
DotNet Framework 3.5 and 4 should be installed BEFORE any drivers, like the name suggests, they are a "FRAMEWORK" for windows to build on, so they should be installed first.
Intel Dynamic Platform & Thermal Framework Driver only needs to be installed if you have a "Extreme" CPU, like a 3920,3940,4960.... Otherwise it's just a waste of time.
Make sure you have all your additional program installed, backgrounds, computer name, profile picture finished, completed before you install AlienRespawn as it will make a backup factory image of the computer the way it was when Alienrespawn was installed, you will not be able to change or add anything to the backup installation file after this
Sorry, forgot the link to the guide.

Alienware-Naomi
6 Operator
•
1776 Posts
627
0
Posted June 23rd, 2014 10:00
Hi!
Is the computer not powering on at all, or is there some AlienFX and fan activity? Have you tried to power on with the AC adapter only or battery only?
If issue persists, I recommend you get in touch with Technical Support in your region or send me a private message if you're in the US or Canada so I can review your case.