
Solved!
Go to SolutionClosed
Latitude 3420, stuck on firmware update
I restarted my dell latitude 3420 to update my firmware and it is stuck at: flash progress 0% saving manifest. I don't know what to do. It has been stuck for a while now.
25 people also have this problem
Responses (54)
Solutions (0)
DELL-Cares
Moderator
•
27843 Posts
•
745 Points
23026
1
Posted October 15th, 2022 08:00
Hello, I see you are looking for technical assistance. If you need our help, you can start a private message with us and we will be happy to assist you.
#IWork4Dell
For all non-technical issues that require your private data, we must communicate via a private Direct Message
Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoiceIMOperations
1 Rookie
•
7 Posts
22757
1
Posted October 17th, 2022 01:00
This has literally just happened to my Latitude 3420 this morning.
jandrewsgrci
1 Message
22678
3
Posted October 17th, 2022 02:00
This has now started to effect our fleet of 3420's. Have Dell removed the offending update as well as released guidance on how to fix this? Otherwise it feels like Dell is going to be receiving a lot of calls regarding bricked laptops.
IMOperations
1 Rookie
•
7 Posts
22675
2
Posted October 17th, 2022 03:00
I think the only to resolve this is to remove the power and just let the battery drain, forcing a shutdown.
Found other posts for the same issue
Hey @DELL-Cares and @IMOperations
I know of 8 customers who ran into this issue today and calls are still coming in for this problem. We have a fleet of over 2000 Dell Latitude 3420's, and these are just the ones I know about.
Customers are reporting that they get stuck in this state for hours.
In some cases after letting the battery die, they get stuck in a perpetual Auto-Recovery reboot loop.
Naturally I have a host of questions
- Is this a known issue with Latitude 3420's?
- Is this a known issue with this particular update?
- Is this a known issue when BIOS updates are applied when certain conditions are met?
- Once the issue is resolved (e.g.: by flashing the BIOS from a USB stick via F12), is there anything we can look at on these problem machines to determine the root cause of the failure?
- What can we do to avoid this in the future?
Many thanks

IMOperations
1 Rookie
•
7 Posts
22745
8
Posted October 17th, 2022 04:00
Unplug the power and let the battery drain to force shutdown - it takes around 2 hours for a fully charged battery to drop below 50% for it to shut down.
Once shut down, plug the power back in and let it charge for about 10-20mins for the battery to reach over 50% then boot the machine back up. It will then initiate the BIOS recovery.
If you can't wait for 2 hours, you'll have to unscrew the back plate to disconnect the battery.