these are 2 different things right - Self encryption drives  vs isilon data at rest

i have one cluster has segate disks which are SED so nodes obviously stating SED Node but other cluder doesn't have this

column which means DARE not in place for this ??

NM - i got it now. i am under a impression that isilon  has inbuilt data at rest encryption by design but its not  it get it by by drives ( SED ).

I have an array that's on OneFS 8.1.0.4.  When this command is run against the array, i get the following output:

isl01-1# isi devices
Description:
Manage drives and nodes.

Required Privileges:
ISI_PRIV_DEVICES

Usage:
isi devices
[--timeout ]
[{--help | -h}]

Subcommands:
drive View and manage drives in the cluster's nodes.*
node Initiate node-level actions.

Options:

Display Options:
--timeout
Number of seconds for a command timeout (specified as 'isi --timeout NNN
').
--help | -h
Display help for this command.

See 'isi devices --help' for more information on a specific
subcommand.
* Actions under this collection can be specified as subcommands directly under
'isi devices' e.g. 'isi devices view'

Does this mean SED is not available on this array? 

Thank you.

On more modern releases of OneFS, the command is using the API, and the correct syntax is
# isi devices list e.g.

CSE-X200-1-1# isi devices list
Lnn Location Device Lnum State Serial
-----------------------------------------------------
1 Bay 1 /dev/da1 11 HEALTHY JPW9K0N02VU58L
1 Bay 2 /dev/da2 13 HEALTHY JPW9K0N132GH3L
1 Bay 3 /dev/da3 9 HEALTHY JPW9K0N02V69SL
1 Bay 4 /dev/da4 8 HEALTHY JPW9K0N02V636L
1 Bay 5 /dev/da5 7 HEALTHY JPW9J0N02VBSYV
1 Bay 6 /dev/da6 6 HEALTHY JPW9K0N02VU55L
1 Bay 7 /dev/da7 5 HEALTHY JPW9K0N02VU53L
1 Bay 8 /dev/da8 4 HEALTHY JPW9K0N02V6DHL
1 Bay 9 /dev/da9 3 HEALTHY JPW9K0N02VULSL
1 Bay 10 /dev/da10 2 HEALTHY JPW9K0N02VLM3L
1 Bay 11 /dev/da11 12 HEALTHY JPW9K0J80G26JL
1 Bay 12 /dev/da12 0 HEALTHY JPW9K0N02VV5TL
-----------------------------------------------------
Total: 12

Hello isi_tim,

In OneFS version 7, its is easy to tell that a node is an SED node after running the ''isi devices" command.

I can not tell just by looking at the "isi devices drive list" command.

Is there a command to very that in recent versions?

Thank you.

@jessieobioma,

try isi_classic devices